Needle Jet Adjustment

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

illville

Well-Known Member
Joined
Oct 26, 2011
Messages
95
Reaction score
0
Location
Kennewick, WA
Sorry for the noob question. I've looked all over the site and haven't been able to find a link on how to adjust my stock carb needle. I've done it on my sons round slide Mikuni but don't know how this one works. Your help is appreciated,
Thanks
 
un screw the top and the side covers, and pull the top little e-clipon the leaver mechanism on the sode of the carb.then with the top cap being off there is a lock screw in there, take the screw out pull the top shaft out. pill the slide and be carfull not to lose the little spring in the slide,pull the arm out of the slide along with the little spring, then unscrewe the plastic piece and the nedel should come out if you flip the slide around.
 

Latest posts

Back
Top