modding the stock carb?

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

warrior111

Well-Known Member
Joined
Sep 1, 2008
Messages
87
Reaction score
0
Location
Nova Scotia,Canada
Is there any way to get more power out of your stock carb?(other than jetting)
Like,can you take the butterfly flap out to make more power?
 
There's pretty much nothing you can do as far as I know. You can't remove the butterfly because there's a giant gap between the slide and body when it's completely closed, and you can't remove the slide for obvious reasons.

What you could try is increasing the tension in the spring the holds the little white thing that pushes the accel pump plunger, that will let you use a stronger spring on the plunger, helping it to keep from getting stuck and it might just give you some extra throttle response.
 
Back
Top