Missing a fuse.

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

87 warrior

Well-Known Member
Joined
Nov 7, 2010
Messages
163
Reaction score
0
Location
Renfrew,Ontario,Canada
I have a 1987 warrior and i cant find a fuse on the wiring harness for the life of me.So i would like to install one but im not sure where the fuse goes and how big of a fuse to use.can anyone help me plz.thx
 
stock fuse is a tube fuse. It look around there like it was spliced into at all?
 
DSCF0560.jpg

Fuse is in the black rubber holder bottom of pic,connected to red wire on the left going into the harness.
 
i have two bikes where they ommited the fuse,and ran straight into the relay,if thats the case..........than get a manual(owners) and revert back to the way that it should be!!!
 
So theres only 1 fuse on a warrior and it goes from the battery to the rectifier/regulator.and its a 15amp fuse.Am i right or wrong
 
Last edited:
Back
Top