Header gasket??

[YN89]

Hey fellas when I installed my powerbomb header and slip on I felt like the pb wasn't getting a good seal to the engine even thou I've tightened it to the point where it can't go any more i feel it's not closing enough did some searching and I need a gasket but I can't get any part numbers or find anything on eBay any one know the partnumber or something...and another thing what is the best silicone to use to seal the header and slip on together??

 

[geeessfore]

Silicone with copper is best for exhaust since it will flex and take the heat alittle better.

 

[elwood]

exhaust gasket GASKET,EXHAUST PIPE
3GD-14613-00-00 (replaces 90430-38054-00)

it is #17 on the parts finche here is a link to the page


http://www.motorsportmonster.com/fi...&category=ATVs&make=YAMAHA&year=1992&fveh=470

 

[YN89]

Thanks Elwood!

 

[duneracerweston]

use red silicone on both sides of it even if its a new gasket because it wont seal well and allow 300 min for it to dry before you crank it otherwise it will blow the silicone out