carb part help

[wal2l2ior]

The black rubber boot thing for the Accelerator PUMP in the carb???????? I need to locate a new one. Anyone know where to find it, its not listed on the parts diagram?? Anyone?


ALSO, The warrior has a GYTR slip on and a K&N(lid still on air box) and i notice carb has a 155 main jet in it, does this seem right?

 

[r350ridin]

i dunno about your problems, but while you have the carb apart id take off the lid and rejet it

 

[wal2l2ior]

Anyone?

 

[yamarider]

If it's not in the part diagrams i'd go straight to a yamaha dealer and see if they have a different listing.

 

[imtarnished]

The Jetting may be ok, Depending on your altitude above sea level. The higher you are, the Higher needle you need (I think). I'm not completely definate since I live like 12 feet above sea level...
~Bill

 

[wal2l2ior]

seriously....no one knows?

 

[yamarider]

From what I can tell, the only way you can get the rubber boots is along with the plunger. Look at part #42 in the warrior carburetor diagram, I think that's what you're going to have to order.

http://www.highlandsyamaha.com/pages/parts/default.aspx