Carb issues

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jmg1

Member
Joined
Oct 19, 2006
Messages
10
Reaction score
0
Stock Warrior 2004 model, Minkuni carb developed idle issue. Will not maintain constant idle speed. Idle will become erratically high and then drop so low it will stall. I replaced Minkuni with an Edelbrock Quicksilver. Still has idle issues, all over the place! Has new rings, new piston, valves were lapped and adjusted... throughout RPM range bike ran better with the Edelbrock but still has the same issues. All adjustments have been made across the board from accelerator pump to needle to needle height with no consistent idle in sight. Possibly electrical?? Looking for some help with tuning carbs, and or possible ignition problems or any other ideas? Would appreciate any suggestions or ideas. Thanks!
 
Back
Top