Cam Timing

[blonka]

I rebuilt the top end and put a cam in my warrior but im having problems geting it in time. I can onley get it to far ahead or to far behind. Im onley moving it one tooth i dont know what the deal is.

 

[yamarider]

Are you still using the stock cam chain? If you are that's probably your problem, the stock one on my 2001 was stretched to all hell, the originals aren't the greatest.

 

[blonka]

Ya that might be my problem. I have a did timing chain i was gona put on it but I didnt have the flywheel puller i needed.

 

[darebee]

I havent had the gear off on the warrior but when I did the top end on the 200x, I realized that you could put the cam gear on "inside out".
This would cause the timing always to be .5 tooth out one way or the other. Possibility?

 

[blonka]

Ill take another look at it tomarow. It does seem to be about half a tooth off.