38mm FCR carb for warrior

[jcizzo]

Hey, was wondering if anyone out there had any experience with these. i'd like to re-carb my warrior (2003). i'll put a new exhaust on it as well.. trying to get more power out of it.

i'd like to keep the airbox (yes, i'll modify it for additional airflow)..

when i've read before, everyone throws around a dozen carbs that are the best of the best.. i'd like an edelbrock, but they're very expensive. i read the FCR is killer with a bunch of people backing up that claim..

what are people's experiences and what other modifications are needed to fit it to the warrior?

thanks in advance.

 

[lbjamm]

You'd probably need a Raptor 350 intake boot. At least that's what I used to install my Edelbrock. You might need a custom built air tube from the air box. I been looking at swapping to a FCR37, but they seem to be about the same as I payed for my Edelbrock. If I do swap, I will sell the Edelbrock, but it will be awhile as the Warrior is on hold as I have other priorities right now.

 

[derheim]

I just ground one end of the stock boot perfectly round

Sent from my SAMSUNG-SM-N920A using Tapatalk