Search results

Got the nut in today and put it back together. I couldn't find the old nut anywhere. Cranked it up, no more tick! I can finally finish putting it together. Luckily its going to be about 75 Sunday so I can actually ride it!!

I'm going to look again when I put it back together. If I can't find it, I'll just hope for the best....

im not sure where its at. I looked down in the head but didnt see it. I assume its either in the head or bottom end.

well, I got plastics put on and then the motor started ticking. pulled valve cover to inspect and the jam nut for the adjuster is missing. had to order one because no one around me sells a m7 nut. waiting on that to get here so I can put it back together. I should have the nut this week.

My buddy put one of these in his 04 r6. He had no idea that when you pull stock tensioner, it automatically ratchets completely out. He set the new manual tensioner to match the stock one. Cranked bike, ran couple mins then locked motor up. I had to replace chain, tensioner, and guides. Also had...

Waiting for stickers and to be put on!

Mine clanks most of the time. I've figured out that you can hold throttle half way and it won't clank.

So are we thinking bad stator? When ohmed, i got 0.9 2 ways and 1.0 the last

It's the outside sidewall. It's about 3/8 in long but all the way through so it's leaking prett good.

I'm guessing you have to pull flywheel to replace starter clutch??

I have a battery now. When I bought it, there was no battery but you could roll it off and ride it. Now you can't do that. Ill check the jets I pulled out when I built the carb.

My 01 is having a couple issues I'm not sure about. When starting cold, will not start with choke in/out. You must use staring fluid. Once running, it runs decent but will pop through carb and exhaust. Header glows red. Carb was just rebuilt. Bike runs fine until you disconnect...

Oh and plastics are painted! Hopefully ill have pics tomorrow!

Got the shifter, grab bar and flush mount valve stems in today. Also discovered I have a cut in one of my rear tires.... Hopefully I can put some slime in and seal it up.

Ordered a yz250f shifter and flush mount valve stems for the ole girl tonight!! One day ill have time to get all these new parts on...haha

http://shop.mobileweb.ebay.com/searchresults?kw=LED+tail+light+for+suzuki+atv+ltz+king+quad+dirt+bike+mx+dr+drz+it+650+400+sm+LT&cmd=SREF&fads=All&call=All&sort=BestMatch&mfs=SBCLK&acimp=0&isNewKw=true

It's a universal led tail off eBay. Has 3 wires for a brake light.

I did order a led tail light and projector heads with hids also.. Only thing else I'm going to order is a sticker kit.

It wouldn't look so bad if someone had taken the time to paint it right...