Search results

I forgot to mention... you can start the bike and not hear the starter keep engaging. Most of the time this behavior is seen when you are going fast and slow down real quick after the bike is warmed up. After that.... the starter keeps engaging no matter if you tap the solenoid or start button...

Hey all, can a bad Starter One Way Bearing Clutch cause a starter to engage after the bike is running and moving? I know it's either the light/shutoff switch, starter solenoid or something else causing it. Changed the solenoid twice and it didn't fix it. Thank you!

Hey all... my starter broke and seized up the engine so it stalled. I put another starter on and now i'm getting a very loud ping or clang noise from the center of the engine when it tries to crank and it won't turn over. Got any ideas... thanks!

What two wires did you need to flip? The ones in the 3way or 4way plug and what colors. The last one I bought looks just like this one and the bike ran for 3 years. Thank you. (3 prong) all white to all white (4 prong) 2 blue and 2 green from stator single wire brown from stator to brown...

Yes, and even the old stator was testing correctly unless i'm testing things wrong.... these are Caltric aftermarket stators and the wire colors don't match up to Rick's Stators. My ohm tester also does not have a 2k setting so I was using the 20k setting. Was that a bad thing? Thought I would...

I'm at my wits end and need guidance please. All together I have replaced the below parts and still no spark!!!!! CDI Box, Ignition Coil, Spark Plug, Stator, Rectifier, Starter Selenoid, neutral & reverse switch. What I do have is lights working, battery at 12.5, turns over but no spark from...

I was able to find grounding issues. One of the upper engine mount bolts was loose. The other issue was the ignition coil was working then it wasn't. Don't know what happened but need to replace. ***UPDATE**** 4/7/2017 I just ended up replacing the everything but the cdi box. I checked the...

I was able to check out what you asked and got help from a dealer mechanic. The spark and electrical system seems to be working correctly.... except..... * still need to ground the starter with a jumper cable from negative battery terminal to outer shell of starter...... we are thinking the...

Thank You again! I will do a check on those parts today.

I'll appreciate any advice! I've had this quad for a couple of years now. Started having starting issues. Now won't start, it just clicks the solenoid. * Battery charged and verified by O'reillys and Autozone to be a good battery. Yes... I did go to both. * Starter Selenoid New * Starter New...

A few parts... Hey there.... The issue was with the Ignition coil itself first. I did change the Stator (Caltric)... and battery started charging up again but not a lot. Found out that the Front engine mount was broken... and someone suggested that it could lead to a bad grounding problem...

Stator wiring Issue for Yamaha 1987 warrior 350 Got everything working... new stator was the key. But for some reason.... the battery is not charging enough after running the quad for an hour or more. It attempts to start but doesn't have the amps. If I hook up the charger for 10 minutes at 2...

Wiring Diagram for 87' warrior 350 I did find a diagram, but it says that the "blue" wire goes to fuse. I'm going to tear it all apart and start from scratch. Check my albums for wiring diagram if anyone out there needs it.

Wiring Diagram Index Wiring Color Code 1 AC magneto 2 Rectifier/regulator 3 Main switch 4 Fuse 5 Battery 6 Starter relay 7 Starter motor 8 Clutch switch 9 CDI unit 0 Ignition coil A Spark plug B Park switch C Neutral relay D Drive select lever switch E Neutral...

Hey all... This Quad runs great (1987 Yamaha Warrior yfm350), it can be pull started and it did start with the start button, but it slowly over a few months just stopped being able to be started electrically. Was just getting sluggish, thought it was the Battery at first. With that said, I have...

Just rebuilt but still needs a few more parts.

Out of the mud... but still repairing. Received my new Ignition Coil today. What a difference... she started running way better. The rest of the issues it seems turns out to be the carb gas/air mixture and the idle screw. Now she will even pull start as long as I use the decompression...

Checked Coils Thanks for the info Moby! I did check what I could see and found that the ignition coil was definitely bad... but have one on order already. As far as the Stator... i'm reluctant to remove it from the ATV because i'm not familiar with ATV mechanics. The wire color code you...