JRK5892
Well-Known Member
- Joined
- Dec 17, 2012
- Messages
- 254
- Reaction score
- 0
well finally got some of the customer stuff out where i can spend a little TLC on my quad... figured i would start a build thread on it so that i can keep it all in one place... it is a 96 warrior frame, with 08' Raptor everything else (shocks, motor, shifter, foot pegs, etc), as she sits now it has 22 x 11 x 10 fronts tires, 25 x 12 x 9 rear tires with a 10 -42 gear set, Raptor air box/carb, K&N filter, jet kit, Stock 350 raptor exhaust with after market spark arrestor... and that is pretty much how i got it... i am not 100% if i am going to pull the frame for powder or not yet... but have to do some upgrades to it
I have a good amount of parts gathered up so far... nerfs, Ebrake eliminator, adjustable clutch lever, twist throttle, bars, risers, etc... also have one of Sparkymichigan's Torq header pipes coming. I hope to pick up some new fenders today cause as you can see mine are all cracked to hell up front.
first plans are some powder, plastics, change the gearing (14/40), new rims and tires to get rid of the huge tires it has now, and a custom deadlastracing wrap for it... then we will see where this goes
installed HID 35w, 6000k
had no tail light so i made a mount
hit it with some texture black powder
this will be mounted here
I have a good amount of parts gathered up so far... nerfs, Ebrake eliminator, adjustable clutch lever, twist throttle, bars, risers, etc... also have one of Sparkymichigan's Torq header pipes coming. I hope to pick up some new fenders today cause as you can see mine are all cracked to hell up front.
first plans are some powder, plastics, change the gearing (14/40), new rims and tires to get rid of the huge tires it has now, and a custom deadlastracing wrap for it... then we will see where this goes
installed HID 35w, 6000k
had no tail light so i made a mount
hit it with some texture black powder
this will be mounted here