YAMAHAULER The Beast

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

beastlywarrior228

Super Moderator
Staff member
Moderator
Supporting Member
Joined
Jun 29, 2009
Messages
6,891
Reaction score
97
Location
Mogadore, Oh
Congrats on your second elite dude.

1613150109136.png
1613150129168.png
1613150150006.png
1613150164251.png
1613150269215.png
1613150284867.png

Chassis | Suspension | Controls

Frame: Stock
A Arms: ASR +2 400ex LT
Swingarm: Hansen +2
Steering Stem: +3 Roll Design antivibe
Stabilizer: N/A
Axle: Niche adjustable +2+4
Carrier: LSR billet dual row round house
Locknut: 3 piece Tusk
Hubs F|R: stock
Bars: 1 1/8" Trail Tech X fat bars
Throttle/Clutch Lever: Terry Cable dual Throttle, ASV C6 Pro shorty
Grips: ODI Rogue
Nerfs: Raptor 350 Alba pro peg
Pegs: Raptor 350
Bumper: IMS Classic 1 off Bill Balance
Grab Bar: Custom fabricated
Front Shocks: 2014 YFZ450R Jogoca triple rate
Rear Shock: custom built 01 Raptor 660 body with banshee coil spring
Brake Pads: EBC
Brake Lines:Front- 47" Speedlinez SS
Rotors F|R: Stock / Tusk Typhoon
Rims F|R: Alba beadlocks with Goldspeed rings
Tires F|R: GBC XC Master

Body

Plastic: stock fenders & aftermarket Maier hood
Graphics|Seat Cover: No Graphics, Custom Seat cover
Number Background: N/A
Handguards: Powermadd Sentinel
Bar Pad: N/A
Fuel Tank: IMS Oversized
Skids plates: DRW Performance
Lighting: two 4" round LED's, 6" LED dual row bar mounted to handlebars & Afterburner LED taillight

Engine|Drive System

Cylinder Head: Mild P&P
Gaskets: Tusk
Piston: 84mm Wiseco 10.25:1
Cam|Valves Springs: Web .390, stock valves, Kibblewhite HD titanium springs
Bore & Stroke: 84mm × 63.5mm
Displacement: 357cc
Carburetor: 06 yz250f 37mm Keihn FCR with QS3 & R&D Flex jet
Spark plug: NGK D9EA
Stator: Db electrical
Shifter: IMS direct
Air Filter|Box: K&N with Outerwears pre filter and no box
Header|Silencer: custom DRW Performance header & midpipe with 11" Yoshimura RS-3 silencer
Clutch|Plates|Springs: Driveline Performance
Gearing F|R: 14-40
Chain: DID Gold X-ring
CDI|Killswitch: ProCom/Outlaw racing tether
Cooling: DRW oil filter cap with an6 stainless braided lines to a 10 row Performance cooler with 4" pull spal fan
Other: all electrical has been swapped to 97-01
With custom built L&S Harness, yfz450 dual piston calipers front & rear, yfz450 Rath Racing battery box & WPS Featherweight Li battery, DRW Case brace & saver, B.C.C. Skids sprocket guard, DRW rotor guard, Raptor 350 clutch cable mod, Modquad rear fender braces,
Fly Racing start button, DRW Performance billet clutch basket, Modquad chain slider,
T.M. Designworks powerlip chain guide,
DynaTech ignition coil with 10mm plug wire,
 

Attachments

  • 1613150198010.png
    1613150198010.png
    3.2 MB · Views: 15
  • 1613150210823.png
    1613150210823.png
    2.8 MB · Views: 13
  • 1613150223726.png
    1613150223726.png
    2.8 MB · Views: 11
  • 1613150241324.png
    1613150241324.png
    3.7 MB · Views: 11
Thanks guys!! Imo this build completely blows the #5 build from 2012 out of the water oh how the times have changed
and Im not even done yet so stay tuned
 
Last edited:
Back
Top