Turned key quad not doing anything

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Mar 21, 2021
Messages
22
Reaction score
0
im not hearing any of the wiring making the quad want to start any ideas why that would be? I just finished putting things back are there any sensors that would keep it from starting or turning over?

No indicators at all. The Battery is brand new cranking at 225amps fully charged.
 
Last edited:
starter relay is brand new and before i pulled the motor it worked. Since the wire harness is brand new too. I'm guessing its the start button because of this finding. Friends told me its fine i dont need to replace it....... Gotta wait now on a new one

I wanted to break in the motor today but now thats not going to happen
 

Attachments

  • 20210410_115321.jpg
    20210410_115321.jpg
    132.5 KB · Views: 9
I just ran into the same thing last year. I replaced the solenoid but was still having issues. I ended up pulling the start button apart and found the solder went bad.
 
Back
Top