Quantcast

source coil and pickup coil ohms reading problem

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

warrior stu

Member
Joined
Jan 21, 2013
Messages
59
Reaction score
0
Location
kennesaw ga
i have purchased and sent back 4 stators and pickups i'm on my 5th one what i'm wondering is what ohms readings have you all got from your stator and pickup coils? The service manual says the source coil should be 270 - 330 ohms x100 and the pickup coil should be 171 - 209 ohms x100

the readings i'm getting vary but are manly 500 ohms x100 on the source coil
and just above 300 ohms x100 on the pickup coil

so what i'm asking is are thees numbers right and do those of you who have purchased one from e bay have you got the same numbers this will help me now if my CDI has gone out or i need to send the stator back and yes i still don't have spark

i have tried switching the wires and nothing i'm just at a lost
 

YAMAHAULER

Super Moderator
Staff member
Moderator
Joined
Dec 1, 2011
Messages
7,032
Reaction score
2
Location
Wisconsin
I was having the same issue readings were way higher than normal but as soon as I switched the 2 wires around in the plug for the source coil she fired right up and has been running fine ever since
 

YAMAHAULER

Super Moderator
Staff member
Moderator
Joined
Dec 1, 2011
Messages
7,032
Reaction score
2
Location
Wisconsin
yep but my meter could have been bad haven't tried a new meter yet but it runs great and thats good enough for me lol
 

eddyhascal

New Member
Joined
Oct 8, 2020
Messages
1
Reaction score
0
What color was the two wires I switched the two pickups around is this the same thing
 
Top