Quantcast

Raptor and Warrior specs

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

G

Guest

Guest
Yamaha Raptor/Warrior 350:

Raptor Specs are on top of the Warrior specs.

Engine
2005 Raptor 350
2004 Warrior

Bore x Stroke
83mm x 64.5mm
83 x 64.5mm

Carburetion
Mikuni 36mm BSR
Mikuni 36mm BTM

Compression Ratio
9.2:1
9.2:1

Drive Train
2WD; Sealed O-Ring Chain
2WD; Sealed O-Ring Chain

Ignition
DC - CDI
DC - CDI

Starting System
Electric
Electric

Transmission
6-Speed Manual Clutch w/ Reverse
6-Speed Manual Clutch w/ Reverse

Type
348cc 4-Stroke Single, Air Cooled, SOHC
348cc, 4-Stroke Single, Air Cooled, SOHC

Chassis
2005 Raptor 350
2004 Warrior

Brakes/Front
Dual Hydraulic Disc
Dual Hydraulic Disc

Brakes/Rear
Hydraulic Disc
Hydraulic Disc

Suspension/Front
Independent Double Wishbone, 7.9” w/ 5-way Preload Adjustment
Independent Double Wishbone, 7.9” travel w/ 5-way Preload Adjustment

Suspension/Rear
Swing Arm, 8.3”, and Threaded Preload Adjustment
Swing Arm, 7.9” travel with Rebound/Compression Adjuster & Threaded Preload Adjustment

Tires/Front
AT21x7-10
AT22 x 7-10

Tires/Rear
AT20x10-9
AT22 x 10-9

Dimensions
2005 Raptor 350
2004 Warrior

Dry Weight
375 Lbs
397 Lbs.

Fuel Capacity
2.4 Gallons
2.4 Gallons

Ground Clearance
4.5”
4.9”

L x W x H
69.7”x 43.1”x 42.5”
72.4” x 42.5” x 42.5”

Seat Height
32.3”
30.1”

Wheelbase
47.6”
47.2”

Other
2005 Raptor 350
2004 Warrior

Colors
Team Yamaha Blue/White; White/Red; Grey (Special Edition)
Team Yamaha Blue/White; White/Red

Lighting
Dual 30W Krypton Multi-reflector Headlights & 21/5W Brake light
Dual 30W Krypton Multi-reflector Headlights & 21/5W Brake light

Warranty
6 Month (Limited Factory Warranty)
6 Month (Limited Factory Warranty)

MSRP
$4,999* Available from June 2004
$5,199* Available from August 2004 (Special Edition)
$4,699*
 

yamaharaptor350

Active Member
Joined
Feb 27, 2005
Messages
2,273
Reaction score
0
Location
Mass
there is hardly any difference other than shocks, weight, and tires. wtf is bsr on the carb does it give any power??
 
G

Guest

Guest
Im not sure what exactly it means but the carb on the Warrior is a BTM with an accelerator pump and the BSR carb on the Raptor I believe give it an added throttle response and a little bit more low end.
 

dswwarrior350

Active Member
Joined
Feb 27, 2005
Messages
2,486
Reaction score
0
Location
Hastings, Pa
Yea they arent that much diffrent. I do like the restyling in the front fenders and light now. I didnt like it when it first came out but now i like them.
 

boxhead

Active Member
Joined
Mar 18, 2005
Messages
1,231
Reaction score
0
Location
Michigan
Don't forget the smaller tire size on the rappy, compensates for the higher gearing. They're probably the same because of that. :eek:
 

idle

Member
Joined
Mar 13, 2005
Messages
299
Reaction score
0
Location
Averill park, New York
So would a raptor 350 carb fit on a warrior and would it be worth the money? Is there carburators off any other machines that will fit a warrior?
 

yamaharaptor350

Active Member
Joined
Feb 27, 2005
Messages
2,273
Reaction score
0
Location
Mass
So would a raptor 350 carb fit on a warrior and would it be worth the money? Is there carburators off any other machines that will fit a warrior?
i dought it wouold be worth the extra money... i think it just gives better throttle response... if i were to get another carb it would be the quicksilver edelbrock carb there sick ;D
 

DeathShadow

Active Member
Joined
Feb 27, 2005
Messages
2,766
Reaction score
1
Location
NY - Orange County
[quote:5rirfb3a]So would a raptor 350 carb fit on a warrior and would it be worth the money? Is there carburators off any other machines that will fit a warrior?
i dought it wouold be worth the extra money... i think it just gives better throttle response... if i were to get another carb it would be the quicksilver edelbrock carb there sick ;D[/quote:5rirfb3a]

yes! :cool:
 

tistheman5

Member
Joined
Mar 1, 2005
Messages
344
Reaction score
0
sorta, like its not a direct bolt on but yea you can make them fit. if im not mistaken there is a guy on this site who has done it
 
Top