Project won't start again

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

99Pa_warrior

Member
Joined
Jul 2, 2022
Messages
21
Reaction score
4
Location
Ellwood city pa
I'm working on finishing a 99 warrior budget quad. It was running until it stalled in reverse and now nothing. I can start it by jumping the solenoid but not the start button. Oh and there's no neutral or reverse lights in the dash.

Thanks for the help on my first build
 

Attachments

  • 20220708_151212.jpg
    20220708_151212.jpg
    221.6 KB · Views: 4
Should I replace the switch on the reverse ever lever? I'm at the end of my rope. I need a new carb boot too. It's backfiring between the carb and cylinder. It has a full fmf exhaust and don't know if I need different jets or if they were changed. I'm pulling my hair out
 
Bummer, is it a different issue from last time?
 
Yeah it ran then u put it in reverse, it stalled, and that was it. I'm going to try to replace the switch on the reverse lever and see if that helps. Also getting a new intake boot, carb rebuild kit, and new jets. None of that will matter if it won't crank without jumping the solenoid. After that it's time to pretty it up
 
  • Like
Reactions: YFM
Back
Top