Oil cooler

[warriorrider13]

whats the point of putting these on because the warrior already has air blowing around the top end anyways.

The purpose of oil cooling is to bring oil into the little box in front of the engine and the air cools it down then puts the cool oil back in the engine and takes more.

 

[2xtreme]

It has everything to do with surface area.

The greater the surface area (i.e. ea fin of the oil cooler)used to dissipate heat, the more cooling is done.

 

[DeathShadow]

It also increases the volume of oil you hold...

 

[timmey27]

oil coolers to most peaple here is a must have.....

 

[2xtreme]

It also increases the volume of oil you hold...

good point.

Which also helps in cooling (or not heating as fast, anyway)

 

[timmey27]

yup, that is a good point, u two extreme

 

[DeathShadow]

[quote:dirbel1z]It also increases the volume of oil you hold...

good point.

Which also helps in cooling (or not heating as fast, anyway)[/quote:dirbel1z]

It wont heat as fast, and when heated wont over-heat, or need to be changed as much; larger volumes of oil wont break down as fast.

 

[warriorrider13]

how much more oil are we talking?

 

[DeathShadow]

Stock is 2.5, with an oil cooler your looking at 3.2-3.3