StrokeMyWarrior
Member
- Joined
- Feb 10, 2021
- Messages
- 15
- Reaction score
- 0
So my con rod bearing blew out, I assume from the young grandkids of the older man I bought it from over revving it before me. I couldn’t find a machine shop that would replace it, so I ordered the Hot Rods +4mm stroker crankshaft. With a stock cylinder on, will this cause the top of a STOCK piston to reach 0/exceed 0 deck height? If this does get to 0 deck, would that cause detonation due to over-compression? I’m new to this forum and would really like to get some input from other warrior/raptor wonders, thanks.
Last edited: