Neutral light wiring

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

Superthrash1

Member
Joined
Jun 22, 2022
Messages
5
Reaction score
0
Location
Knoxville TN
Hello gang, new member here. I’m on my second Raptor 350 after buying one new the year they released.
Question I have on my new one..previous owner did a lot of “modifications” and I am trying to add an aftermarket neutral light. Many of the connectors and wires have been cut or bypassed. My neutral safety switch doesn’t have a wire coming off it at all, what would be the way to connect a two wire light to have an indicator?
 

YFM

Administrator
Staff member
Admin
Moderator
Joined
Dec 8, 2018
Messages
96
Reaction score
11
Welcome.
Sorry, I can't be of any help. Hope someone knowledgeable will be along soon to answer your questions. Do you still have your first Raptor 350?
 

beastlywarrior228

Super Moderator
Staff member
Moderator
Joined
Jun 29, 2009
Messages
6,681
Reaction score
61
Location
Mogadore, Oh
Hm this is tricky because a lot of us will do race cut harnesses that eliminate that. I know you'll need the wires that attach to the case of the motor. Do you have those? There should be one for neutral and one for reverse.
 

Superthrash1

Member
Joined
Jun 22, 2022
Messages
5
Reaction score
0
Location
Knoxville TN
I have reverse taken care of. There was a tiny bit of a wire left on the neutral switch by the shifter. I don’t know where to go from there
 

Superthrash1

Member
Joined
Jun 22, 2022
Messages
5
Reaction score
0
Location
Knoxville TN
I guess maybe I could start with a couple questions..where does the thick blue wire go from the sensor, and what wires would the factree light be?
 

YFM

Administrator
Staff member
Admin
Moderator
Joined
Dec 8, 2018
Messages
96
Reaction score
11
Brilliant. Does it involve plenty of wires?
 
Top