Garage Princess's Thread

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

Jan 28, 2021
Reaction score
Jewett Ohio
This is the progress I've made so far. It has a JE 10.5.1 piston in it bored to 85mm with a stage 2 hot cam with ported and polished head. Raptor 350 clutch mod. Drw billet clutch basket. Extended niche axle, and +2 asr a arms. Everything is powder coated. I have a resonant racing exhaust with a zoom zoom fcr carb on the way. And a zoom zoom fcr intake on it already. I have a banshee rear shock with a banshee dog bone. The frame is powder coated satin black. Uni air filter with 1in holes in the air box. Im now working on an 87 hub so I can run a 36tooth rear sprocket. I'm running a 14 tooth front. Next I'm hoping to get an extended swing arm or banshee shocks. If you have any questions don't be afraid to ask. Im willing to answer anything.


Jan 28, 2021
Reaction score
Jewett Ohio
Chassis | Suspension | Controls

Frame: Stock powder Coated Black
A Arms: +2 ASR
Swingarm: Stock powder coated black
Steering Stem: Stock Powder coated black
Stabilizer: N/A
Axle: Extended Niche
Carrier: Stock Powder Coated Red
Hubs F|R: Stock Freshly Sandblasted w/ New bearings
Bars: Tusk
Throttle/Clutch Lever: Tusk
Grips: Stock
Nerfs: Alba Racing
Pegs: Stock
Bumper: Prm
Grab Bar: Stock
Front Shocks: Stock
Rear Shock: Banshee
Brake Pads: EBC
Brake Lines: braided Calipers: Streamline
Rotors F|R: Stock Fronts/ Tusk typhoon rear
Rims F|R: Stock
Tires F|R: Sun F


Plastic: Stock Red
Graphics|Seat Cover: Stock (No Graphics)
Number Backgrounds: N/A
Handguards: N/A
Bar Pad: Tusk
Fuel Tank: Stock
Skids plates: Richotet
Lighting: Ebay Led Pods

Engine|Drive System

Cylinder Head: ported and polished
Gaskets: Tusk
Piston: JE 10.5.1
Cam|Valves Springs: Stage 2 Hot Cam/Kibble White
Bore & Stroke: 85mm
Carburetor: Zoom Zoom Fcr
Spark plug: D8ea
Stator: Zoom Zoom
Shifter: Ims
Air Filter|Box: Stock with holes with an uni
Header|Silencer: Resonant Racing
Clutch|Plates|Springs: Driveline Performance
Gearing F|R: 14/36
Chain: Primary Drive
CDI|Killswitch: stock
Cooling: Drw oil cooler cap,trans cooler
Other: All New Bearings All the way around.
Everything that can be powder coated is powder coated.
Last edited:

Latest posts