FLYWHEEL INSTALLATION???????????

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mattmanz71

Active Member
Joined
Feb 11, 2009
Messages
37
Reaction score
0
???Hi , i have no idea how to press the flywheel back onto the crank shafte and cant understand what the clymer book is saying!! any help would be great!!

Thx, matt
 
put the flywheel on, lined up with the key. then you put your stator cover on, and you will have a splined spacer looking thing, you put that over the crank shaft, then you put the bolt on, and torque it to specs...
 
thanks man and there is no nut that goes on the threads where you put the flywheel puller???
 
Im getting ready to do this too. So let me get this straight. The bolt that goes in the end of the crank will press the flywheel back on? Will it not strip out the threads on the crank with all that force?
 
that is correct i believe the torque spec is 36 ft lbs i just did mine no problems!
 
Back
Top