duneracerweston

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Duneracer what type of led blue lights did you use bc ive been lookin at doin something like that one my quad. i like to ride at night so that would be a nice touch to add to my warrior
 
alright ill have to figure something out bc mine is murdered out black with tinted tail light with some blue add into bc i like the black and blue look. and is there a good way to make my own hood scoop like maybe find something off a different quad and like plastic weld it together or something? bc i was wondering if off a different kinda quad if one of those hood scoops will go good on the warrior hood?
 
alright ill look into that sometime and did you wire your blue LED into to your head light switch or do you have another switch for them?
 
alright i guess i can up date it a bit, got my 18s on the rear end, mounted the twin piston caliper in the rear, fixed my foot brake linkage and found what a used wrist pin is useful for! also did a re spring on the front end and used it to make pats case saver plate (damn nice piece if i do say so myself) looks dopey in the pic with the 21s up front but it is what it is till i get tires!

IMG_20120927_232507.jpg

IMG_20120925_144115.jpg

IMG_20120924_234445.jpg

IMG_20120927_222649.jpg

IMG_20120927_194025.jpg

IMG_20120927_194917.jpg

IMG_20120927_194927.jpg
 
I built this to race mx, not trail ride like yall do.[/QUOTE]

U better get ya some 22" tires for hatfield or u wont be getting very far! Its rock city there.
 
Lol, can't be worse then the trials around here

Trust me man ohio big trail systems are bad enough, ask dean, beastly, or 2kwarr. Deans been to hatfield, all my uddys have been there and they says its filled with rocks. with them 18's u wont have much fun getting hung up all the time haha
 
well i should order all the parts i need in this next week! gonna send my transmission to CV4 to get "suppercoated" to free it up a bit, also gonna order a crank, valves, JE 12:1 83mm, and a few other nick nac parts and ill be tearing it up again!
 
Just dove in the motor, heres what i found.

IMG_20121014_172025.jpg

IMG_20121014_211716.jpg

IMG_20121014_211648.jpg

IMG_20121014_215301.jpg

IMG_20121014_215453.jpg

IMG_20121014_222647.jpg

IMG_20121014_222716.jpg



well the head is stripped ready to go to Mr. Jessup, when ever the jug gets to me from 98 i will have it re sleeved and std bore and blaster class ready! while its apart the trans is going to cv4 for smoothing. should be a sweet ride when its done!
 
Back
Top