DRW, Pro-Former Intake

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

Gen1Pat

Active Member
Joined
Feb 28, 2012
Messages
6,452
Reaction score
0
Location
Keysville, Va.
So... a while back Weston decided to make a new part, and asked me to try it out. It is a custom intake tube from air box to carb. Made out of silicon tubing, and is nearly DOUBLE the I.D. of the stocker. It is a nicely flowing piece as well. No more kinked and hard bends that the stocker takes. I've had it on for about two months now, but, it was only yesterday that I got to try it out. Fits great, and seems to give a much more crisp throttle responce. It is sucking monster air with Weston's air box. Obviously it is bigger so it will flow better. I can't really remember if there is a differecnce in the power band, but, on and off the throttle it seeemed to perform better. Will post pics, hopefully tomorrow.
 

duneracerweston

Active Member
Joined
Jan 27, 2011
Messages
6,070
Reaction score
0
Location
Brownsboro Texas
yea.. but everyone on here has a drive way :tup:

let me double check and see if i have a picture of it..

edit: this is all i have of it, pat will have to get one of it on the bike.

 
Last edited:

Gen1Pat

Active Member
Joined
Feb 28, 2012
Messages
6,452
Reaction score
0
Location
Keysville, Va.
Best I can do with the cell. ALthough I'm not thrilled about cleaning and painting the frame, it will look sooooo much better then the dirt stuck on mine.
 

Gen1Pat

Active Member
Joined
Feb 28, 2012
Messages
6,452
Reaction score
0
Location
Keysville, Va.
No, it's a small piece of plastic that weston smoothed the **** out of. He can tell you better. Not very large either.
 
Top