Can't get rear nuts off

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

deerman2701

Well-Known Member
Joined
May 1, 2010
Messages
712
Reaction score
0
So I've been trying to get these rear axle nuts off with no luck. I ended up using lock tite last time they were off... The red stuff. Fml. I tried heat an no luck. Anything else inshould try?
 
haha FINALLY got the dam thing after heating it up for what seemed like foreve... got new bearings WITH grease this time... lol


should of listened to you the first time deadlast... bearings with no grease last like 4 months lmfao.
 
yeah same thing happened to me had to use two pipe wrenches one on the axle and one on the nut and two people to get it off lol
 
Yeah any good deals or were to get one at? Im replacing my rear end and that would help a lot.
 
A lock nut?

Go on ebay and get one for a Banshee in this style: http://www.lsracing.com/yamaha-banshee_billet-locknut-yamaha-banshee.html

Its just a link to the lonestar site to show what the lock nut looks like. The stock lock nuts for Banshee's and Warriors are the same so that will work for both as well.

If you get one of the ones on ebay... I think its modquad who usually makes the cheaper ones (these are fine quality as well)... they are around $40
 
no the link was for the style you should look for... of course they are well over $40 from lonestar... hell I got a good deal on a new one from ebay and paid $70 for my lonestar banshee nut... but thats because I was silly and paid for the name.

If you have ebay, here are a few links to some nuts that are in the $40 ballpark that I was referring to.
http://cgi.ebay.com/ebaymotors/YAMA...932386QQptZMotorsQ5fATVQ5fPartsQ5fAccessories
http://cgi.ebay.com/ebaymotors/YAMA...041857QQptZMotorsQ5fATVQ5fPartsQ5fAccessories
http://cgi.ebay.com/ebaymotors/NEW-...486967QQptZMotorsQ5fATVQ5fPartsQ5fAccessories
 
Back
Top