Breathing new life into a decade old Wolverine...

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

W450

New Member
Joined
Mar 3, 2018
Messages
1
Reaction score
0
Greetings,

I have a pair of 07 Wolverine 450s. I need to get both of them re-jetted for sea-level. I got to thinking, I know that at some point I'll probably add an aftermarket slip-on muffler, and maybe even a hotter CDI brain. I also saw a "performance" coil that looked interesting. Knowing that a re-jet would likely be required if any of those listed mods are performed, do any of them strike you as a "definitely do", or "definitely don't do"? My thoughts are, if I'm already going to pay someone to re-jet, and I can bolt on a part that might gain a bit of torque before the re-jet, why wouldn't I?

Also, which clutch kit seems to make the most sense? EPI, Quadboss, JBs?

We typically run in wooded trails, at less than 1,000' in elevation, but on occasion will go to the dunes. Also, occasional muddy bits in the trails (PNW rain), and occasional snow. The tires are all 25" in diameter.

Thanks in advance for your efforts.
-M
 
Back
Top