Banshee shocks,what the ****

[warriorrider13]

K i have a pair of front banshee shocks and on the bottom of the shock the hole is way larger than the bolt and according to the yamaha dealer there is supposed to be no bottom bushing for the shocks. How am supposed to make them fit? Should i press out my old bushings from my wariror shocks andput them on the banshees and see if they fit?

 

[yamarider]

I'd get the lower bolts for a banshee so they're the same size, then drill out your a-arm brackets so the bigger bolts slide through.

 

[rfmracing]

I hate to say it but there are bushings on the top and bottom of the eyes....

 

[warriorrider13]

well when u go to the yamaha parts finder it doesnt list them. Plz don't tell me they dont make them(sarcastic)

 

[rfmracing]

Simply look at this picture in this auction on Ebay

4644279191

Just as the warriors

And if you go here.....http://www.temeculamotorsports.com/fiche_select.asp?sid=08310816X5K10K2004J7I47I20JPMQ846R0

look at the diagram ....
#34 DAMPER, BUSH B 1 $7.95

Top and bottoms are the same..as are left and right ones

 

[rfmracing]

oh yeah..that was under a 96 banshee