Badass Quad please vote

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
w00h00 I got some sneak peak pictures of my bike as I am putting her back together. :cool: Well these are now pretty old pictures I have the A-Arms and black plastics on; I am just waiting for Elkas now - THEY ARE ON THE WAY!!!



awww1.jpg


wheel.jpg


shineystuff.jpg


chromeclutchcover1.jpg


intake.jpg


HIDdamn1.jpg




Well guys here are my mods (I probably forgot to list some ****):

- Durablue 2+2 Eliminator Axle
- Wicked Products +3 A-Arms powder coated black
- Teflon lined Russel Braided stainless +3 Front Break Lines.
- SRP billet break line holders
- Dynatek FS Programmable CDI
- Elka Sport/Race Series Suspension w/remote reservoirs
- Elka shock covers/shock socks
- TrailTech 6500K MR16 H.I.D billet lights w/covers, custom shock mounts, & handlebar rocker switch.
- Factory Effex All Grip Seat Cover
- IMS Roll Design foot pegs w/kick-up
- Powroll/JE bore kit 365cc 10.5:1
- Race Velocity Port & Polish
- SERDI Valve job
- 1mm Oversized valves
- Powroll .430 midrange cam
- Valve springs w/Titanium keepers & custom spacers
- Edelbrock Qwiksilver carburetor w/thumb throttle.
- Pro Design K&N Intake kit w/Water Repellent Outerwears pre-filter
- Custom chrome K&N case vent filter/airbox mod
- Pro Circuit T4 Exhaust
- FMF Powerbomb Header
- Custom Chrome Clutch Cover
- Custom Direct bolt on shifter
- AC Nerf bars w/ Black Webbing
- Custom PermaCool/Big Bear oil cooler mod.
- DG Off-road Series polished bumper
- Full body Ricochet/Armadillo skidplates
- Renthal Rider bars w/FMF 909 Grips
- Custom under seat waterproof 12 Volt outlet
- Tusk Billet gas cap
- Renthal Chain & sprocket kits 12/40 13/40 & 14/40
- Moose EZ' Adjust Clutch Perch w/forged lever & Motion Pro clutch cable
- Moose Polished Break lever
- ITP HD 6 ply Holeshots Rear 20x11x9
- ITP XCR 6 ply Holeshots Front 21x7x10
- ITP C-series polished wheels
- Custom made Air-Scoops (spencer)
- Yamaha GYTR Billet Stator cover
- Yamaha GYTR Billet front sprocket cover
- Works Connection frame guards
- Pro Design Teather switch (blue)
- Tusk Billet Parking break block-off plate
- Hand Polished Throttle housing cover & Front break cylinder cap.
- PrimaryDrive 8,200 lb tensile strength X-Ring Chain
- Visu In-Line Fuel filter (mmm raw HP here) - $1.30
- Custom blue high output LED motor accent lighting & toggle switch on dash.
- Custom installed Grease/zerk fitting on axle carrier.
- Custom cut OEM BLACK plastics
- Custom painted black wheel hubs

Coming next when I get money:

- DP Clutch kit w/springs


Current projects:

*Putting quad back together.

*Nitrous system install

*Polishing misc. parts on the quad.

Thats it for now I think X_X...
 
I cant wait to see death's quad when he gets the nitrous. Its gonna be fuggin awesomer than it is now and thats hard to believe.
 
I cant wait to see death's quad when he gets the nitrous. Its gonna be fuggin awesomer than it is now and thats hard to believe.

cant wait till he gets his Elkas..
 
srry guys but im gonna have to go with the raptor350 cuz i think it looks the best ;D.... i dont care for the looks of the worriors ;) but they would blow my rappy outta the water
 
I'm not voting for anyone until there's more dirt on those things!!! ;D
 
MY MODS ARE

HSD +5 lt front end
durablue axle
hmf slip on
pro design air filter kit
itp holeshots mxr4
itp t9 rims
elka quad rate shocks remote rezzies
streamline brake lines
asv brake and clutch perch
tag x5 bars
alba graphics
dg national front bumper
dg national rear grab bar
dg alloy nerfs
lonestar steering stem
other litle things

ENGINE MODS ARE

JE piston .20 over
port and polished head
web cam race cam .430 lift
valve job


i think thats all. ::)
 
MY MODS ARE

HSD +5 lt front end
durablue axle
hmf slip on
pro design air filter kit
itp holeshots mxr4
itp t9 rims
elka quad rate shocks remote rezzies
streamline brake lines
asv brake and clutch perch
tag x5 bars
alba graphics
dg national front bumper
dg national rear grab bar
dg alloy nerfs
lonestar steering stem
other litle things

ENGINE MODS ARE

JE piston .20 over
port and polished head
web cam race cam .430 lift
valve job


i think thats all. ::)
pffttt show off, y dont ya just show him all your sponsers and send him an autograph while your at it loljk
 
I gotta go with 53rappy350...cause i like it best...but all 3 quads a badass!!!!! i wish mine would come to look as good as urs...but i dont have that much money to put into mine
 
Back
Top