Search results

I would clean every passage very well before rebuilding it. Use an air hose and blow through them all. Don't need to spend extra money if not needed.

Ingenius, thanks for sharing. Good job.

Great job, where did you get the material? What was the cost for it?

That is awesome, I am totally going to plan a trip to see that. I am not sure what to say about the shocks? I seen a fellow had a set of reservoir shocks off a 700raptor on kijiji for $150. I called and got the dimensions but his shocks were 16.25" center to center for front and 15.25" center to...

Where did you hook up your positive and negative for the winch solenoid? Did you connect right to battery? Seems really odd that you burned out all the wiring on the quad with a winch install?

Welcome to the forum, where do you live in Alberta? I have never been to Crowsnest for a quad trip, didn't even know there was anywhere they would allow quads to go there. I bought the mounting plate and syn cable from Cycle Works in Red Deer.

Have you tried to get a service manual yet? After a quick google search this is what I found for you. http://rapidshare.com/files/564252671/2003%20Yamaha%20YFM%20350%20FWAN%20Service%20Manual.PDF Hopefully this is your unit? It should tell you all you need to know.

Good job, and welcome to the site.

Well got the new rims and boy do they look spiffy. Only problem now is the front tires are 3" wider than the rear tires. I guess the fact that the factory front rims were 12x6 and the factory rears were 12x7.5" instead of the 12x7" for all the new ones really will make the difference. I really...

Upon looking at it some more I decided that a winch lead saver would be kind of nice to have on this. I decided I would make my own and put a "Canadian" spin on it. https://www.flickr.com/photos/101281012@N08/14370361236/"][/URL]...

Due to restrictions on quantity to post I had to break up my write up: I began by following the instructions with the mount https://www.flickr.com/photos/101281012@N08/14206896660/"][/URL] https://www.flickr.com/photos/101281012@N08/14206896660/"]DSC05362[/URL] by...

Good day folks, I just got done installing my winch on my Wolvy and thought I would snap a few pics of the install. First thing I did was get all my parts before I even began the project. Since I really disliked the look of the factory bumper color I repainted the bumper and grab bar black. Much...

Did you have any luck finding anything yet?

Awesome, thanks I just wanted to ensure my research I did was correct.

I dont really understand what you are asking? When you move the gear shift lever the quad speeds up?

Good day all, just did a quick search on rim offsets and I wanted to be 100% sure I am ordering the right thing. I have decided to upgrade my rims and I want to put some itp ss 212 rims on. They come in a 12x74 on 110 bolt pattern. If I have read everything correct I would need to get a 5+2...

Good day Right now I have the stock machine living in an elevation of 2800'. I was thinking of starting with a good air filter, power tip and then tune the carb, till I get a pipe at least. Anyone have any suggestions on what size jets and on the adjustable needle, what groove would I run it in?

Hi all new to the forum, just saying hello there.

That is a sweet looking unit, did it come with everything in the picture? Snatchblock and all? Have you used it yet?