Search results

Im in need of a stock air filter and upper motor mounts. PayPal ready

Notice the beautiful welds. This is on the 87 I bought for 200. I have a 91 but this is different so im not sure what I will need to fix this right. After I grind off the welds of course.

Im looking for an idle adjustment screw for the stock warrior carb. Previous owner ruined the one I have doing who knows what. Thanks

Can I run the parking brake with the cable removed? Meaning until I get a block off will it be fine leaving the assembly on without the cable?

I have put a ton of time into rebuilding my 90 warrior and as I put cotter pins in the front end I find up and down play in the ball joints. I can grab the top arm and see the movement in the lower ball joint. Is it shot? Or can I ride it awhile? Total failure means the joint comes out of the...

Rebuilt the top end on my project warrior with a lightly used wiseco piston and new rings. Bored and honed. On first start it smoked like a chimney! I let it smoke for 15 seconds then shut it down. Got mad went inside. Came back out, started it and no smoke! Ran for it for a minute then shut it...

One of the bearings in my swingarm was so worn it peeled it out with a screwdriver and hammer. The other side still has a little meat left and I can budge the thing. Any ideas for getting whats left of this bearing out? I put the sawzall on it and it wont scratch it. Must be hardened. Thanks

What is the setup on the bottom of the steering stem? When I took apart the steering stem the idiot that had it before me had taken the collar that holds the bearing out and didnt put it back in. It was just the bearing sitting in there with seal holding it in. Then all that was on the bottom...

So I finished tearing my warrior down to the frame. I plan on replacing the steering stem bearing so I pull the seals and I find the hex collar is missing and the threads are messed up. Any remedies for fixing these threads? I dont know what the person who did this was thinking. The threads are...

I bought a warrior for cheap from a guy who said he stopped riding it because it was smoking so bad. It had been sitting for a while so i didnt bother to try to get it started. I assumed I would tear into the motor and find a stock piston and obvious signs of needing a rebuild since it is a 92...

What do you guys do with these? Mine doesnt look to be in too bad of shape. If it were the single cable I would just rebuild it and go on with my life. But this two cable thing has me thinking twice. The cables are in rough shape and the only replacements I find cost 5 times what the single...

I bought this Warrior for $350. Its a 92-94 I think. Has square headlights. It needs a ton of work but Im going to start with the motor. The guy I bought it from said it ran when he parked it but it smoked a lot. The tailpipe is black and oily so it must have been burning oil pretty good. So my...

Its been a while but Ive got the itch to get another warrior. Problem is I have to get my bayou 220 fixed to sell I put the top end together and I have a problem. I have two small o rings left about the size of a dime. I didnt find anywhere to put them when I was assembling everything. The are...

It snowed a bit here in MO. My brother had a snow day and I'm still off for winter break so we did some riding. The video kinda sucks because I make it with a pair of I kam glasses but I fall off at the end. enjoy...

I may get flamed for this but I trust you guys as much as any dudes on a kawasaki forum. But anyway my grandpa gave me his Bayou 220 because it will not start. I have spark and compression. The problem has something to do with it backfiring through the carb. When I pulled it apart I found the...

The motor I bought came with a heli coil in one of the holes on the exhaust port. I'm using bolts instead of studs and the bolt with the heli coil pulled the helicoil out. I went and bought another insert and put it in. It lasted about 3 rides and pulled out looking like a spring. What's my next...

I finally got my warrior running and i'm pretty excited. It runs great the I roll on the throttle and is surprisingly fast, but if i'm in neutral and I stab the throttle or if stab it to pop a wheelie it will just cut out. It runs great I just can't give it gas real fast. What should I look at...

I got a starter and the quad cranks now, so that is progress but its not getting spark. When I pull the plug and set it on the motor all I get is a small spark to the electrode on the plug. What could it be now? I put the stator from the locked up 98 motor on here. You can't tell me that the...

I need the whole filter. The foam part doesn't have to be good. I just need the internals. I use paypal.

First off I want to thank everyone for helping me this far with this money pit warrior. Now I have a couple issues with the carb to go along with the starter issues. First what is the little piece called the connects the throttle cable to the linkage? Cable guide? I managed to lose it somehow...