Search results

The I don't know where its made but the quality isn't much different then the OEM carb. It has worked great for me so far.

No.

Hello everyone! I got my 93 warrior running a few weeks ago and have had a few problems with it. One is it backfires through the carb when cranking it with the choke on, two it sputters and misfires when I try to top it out, and three it will idle high then when i rev it it will idle so low it...

It could be the valve lash.

Hello everyone I got a Caltric stator and put it in now it runs great thanks for all the help i really appreciate it

Starter clutch might be slipping

here is one https://www.dropbox.com/s/1nq7o06e0pq4w6f/Screen%20Shot%202015-01-20%20at%203.43.18%20PM.png?dl=0

Okay so I ran the vin number and its a 93. Also are there any good aftermarket stators?

So i adjusted the valve lash and it started and ran i turned it off so i could put the covers back on and it wouldn't start after that so i took the carb apart again and the rubber boot on the accelerator pump was torn and a i couldn't find a way to replace it so i ordered a zoom zoom carb of...

okay so the accelerator pump inside the carb was seized so i fixed that and i patched some wires in the wiring harness also the compression is 150 and the recommended compression is around 120 could that be causing the starter clutch problems?

I tried carb cleaner that made it backfire through the carb so i adjusted the timing 180 then it started but kept backfiring through the carb and died now the starter clutch is out agian

How would i get the spark in time?

Compression is 150

Yes it has a spark

Hi I picked up a 1995 warrior 350 that wouldn't crank so i got a new starter clutch and gear now it cranks but won't start. Any help would be appreciated