Search results

Very easy to do. The mounting brackets fit just in front of the original brackets (you don't even need to cut the originals off). Drill your holes and bolt them down. Have to use a dremel and grind about half way into the middle brace to allow room for the cooling fins. I wired it to the low...

Like hammy said, pull the headlight ass'y off, unplug the connectors and use a volt meter or test light. Green wires are low and yellow are high beams (black is obviously ground). Good luck.

Another photo.

New headlight ass'y.

Well got it figured out, it was the needle. Runs real good now except I burned up the battery or the starter. Now I get to pull the starter apart and clean and lube it good, replace the batt and hope that fixes the issue. Had a charger on the batt all night and when I went to start her this...

I have great flow into the carb, it's not that. Took the bowl off and reinstalled the fuel line and the float is letting in the fuel fine. The only thing I can think is when I installed the new needle it was not compatable with the old seat. I'm hoping the lingth on the needle was longer on the...

She wants to go but the carb is stopping her. She will run for about 1 min then die. Let it sit for a bit then she will relight and go strong for about 1 min then die again. I think I know the issue. I reaced the needle but not the seat. The screw that holds the seat in is stripped. I put back...

For the last 2 weeks I have been rebuilding my warrior and now she's ready to fire. Kinda nervous. The list. (My signature) Wiseco 10.25 84mm Mega Cycle .415 HD springs P&P head, valve job, deck resurface Stock carb rebuild with 155 main 45 pilot Air box mod with Uni filter 14 tooth...

Hey everyone, I'm a new guy from 45min south of KC MO. Just started my build on a 2003 Warrior. Here's my list so far. 10.25:1 84mm Wiseco Jet kit Uni filter Mod air box 14 tooth .415 mega Has a slip-on Exh, not sure brand. Sounds good tho. Port and polish. Any suggestions would be...

What's the story with the white bro's cam and springs. What's the cam comparable to. Do you know the numbers? How long have you been running it? Why are you getting rid of it?

:argh: Hey guys, I'm desperately looking for a cam. Wanting the Web .390 or Mega .415. Called Web and they only have available the .430 and Mega is out of the .415. Anybody have one they can sell me, please let me know. Thanks Gooch