Search results

looks like you getting lucky. :) good to see that your getting some where and getting stuff.

Did oil and filter change. And it needed it. Black as.

Yeh was posted on YFZ Central. :) So wanted to share with all quad nutters here. :)

Cool movie. And its free to watch. :) SNR 2K13 - GRAVITY on Vimeo

lol. crackup

Hope you get your axle and keep a eye on the date so you can do a case if need be.

Them tires look insane. Did oil and filter change on mine and bleed front and bake brakes.

Warrior CFM air box and UNI filter.

Got one on my warrior and yfz. :) UNI filter in the warrior K&N in yfz.

Very nice. :)

Thanks. :) New bearing carrier with new bearings, seals, spacer. All installed. Getting it onto the bike. Install wheels and check all bolts and nuts. Man this cool so low. low-rider quad. :) Install caliper and holes. Will bleed brakes tomorrow. Skid plate installed. Tested...

I carefully used a bench grinder with wheel wheel in it and then a hand drill with wheel wheel in it for the splines and the thread. WD40 to clean it as you go and then cleaned it with degreaser. Rubbed a little grease over it to shot rusting again. till I do something with it. Got my bearing...

Nerf bar nets installed. Swing arm installed. Just waiting on the new rear carrier/ bearings, seals, spacer all to turn up. Also rear shock is getting looked at today.

Found a little info about the rear shock in service manual last night. Installed length: Standard: 228.5 mm (9.0 in) Minimum (hard): 220.5 mm (8.7 in) Maximum (soft): 235.5 mm (9.3 in) Standard: 15 clicks out* Minimum (soft): 20 clicks out* Maximum (hard): fully turned-in position *From...

Yeah the reservoir line had the steel spring crushed at that point . Thanks will have a look.

Dropped the shop off to quad bike shop and he going to have a look over it and has new bump stops also. Will let you know how I get on.

Got a reply from them finely. Got refund. Will never buy off them again. Anyways I managed to find a front set of rims in a warehouse in New Zealand last ones they had. and is only one rim left at another shop in New Zealand. Now I wait for my rims to turn up this week and I will be happy...

Not cops but got told off by a wildlife park ranger 2 times in one day in a matter of 30 minutes on my quad. lol Don't do this and don't do that. So I rode down the beach away from him.

Just had a look into how remote shocks work and the nitrogen gas is in the re behind a piston and the oils in the shock presses on the press inside the res. Would the gas be released if you remove the hose from the res? or would the piston hold it in there? Maybe my shock is just missing the...

Thanks dude. have had no luck finding a stock warrior shock or 01 raptor 660 shock. have seen a couple of shocks with remote res with valves in them. I have asked a friend that's works in a quad repair shop if he has anything. :) will let you know how I get on.