Thanks, Since it is getting to be riding weather I most likely will wait until next winter. By then maybe someone will be making them without having to send yours first.
Has anyone found someone that makes a cam for the raptor 350. I had seen posts from others that tried the cam for the warrior and found that there is a difference and it actually caused damage. I checked Hotcams website and they list the warrior, raptor and wolverine all together????
It really depends on a few things. Where do you ride? Who is more experienced. A 400ex is more machine than a warrior stock for sure. With his setup the way it is he definitely has an advantage. If you guys ride trails though both of you will be limited on how fast you can go based on skill. If...
No offense meant, it looks sharp as hell. I would just be worried stuff would build up inside. I guess if you make it part of your routine maintenance then no worries. Great job...
Yea, moving it out all together sounds good to me. The oil blow by itself is nasty... Where would you put it though that you wouldn't have the oil that comes out of it all over the place?
Isn't air blowing out of that tube not sucking air in? Wouldn't air be blowing inside of the filter? So why the filter? On the Raptor it already connects into the bottom part of the filter case do we really need a filter for it?
Hey VelociRaptor350 I ordered from this site
http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=3532&prmenbr=361
and it shows #1007 as having a 11/32 barb? What gives did I order the wrong one?
I have a K&N air filter on my street bike that I have never oiled. Those that I have asked don't give a time only how it looks or if you ride in really dirty environments. Since I have never even oiled one I need to have someone show me...
Tip to anyone doing their own jetting do yourself a favor and first go buy 3 4mm x 10mm allen head bolts and 1 4mm x 12mm allen head bolt to replace the stock phillips head brass screws on the carb float bowl. They are hard to get out and if you don't have a perfect fitting screw driver they...
Hey, I have a question. I am still waiting on my open air kit (should be here today) but this weekend I installed my dynojet kit and put in the 138 jet. I have my fmf powerbomb and exhaust installed and just to try it out I took the lid off of the stock air box and rode it up and down the street...