after looking in the manual in the tutorials it appears to be a 8mm bolt. So I am going to assume it is a 8 x 1.25. It seems every other bolt is a 1.25 pitch. The 6mm seems to be the studs on the head.
Does anybody know the size and pitch of the bolt that is used to hold the exhaust on? More specifically the bolt that is by the canister in the rear of the frame. Forgot to loctite and snow riding got the best of it. Thanks in advance for the help.
Thank you for an actual answer. What do you think for a pilot. Think stock with playing the the mixture screw or should I just go one size up. I am trying not to lay the bike any longer than I have to and no real local shops so I have to order off the net.
well thanks for all the help. I suppose once I get all the jetting straightened out I ll post up to actually help some people out instead of mocking them for asking questions that everyone but them seems to know the answers to. I guess this is like every other forum were people will take twice...
I have no luck with the search function on this forum. From what I see, this forum, like many other forums numerous posts are spent answering the same questions a million times and I apologize for adding to this. If anyone could help by posting a thread I will greatly appreciate it. Because...
Its almost time to put the motor back in the bike. I was just wondering if you guys have any good tips for breaking in a camshaft. The card that came with the web cam said don't idle below 2000. Fresh oil and filter will be in the bike. Any good tips or tricks for a good break in?
One other...
I have decided that it is time for a cam. I decided for the riding I do the webcam .390 grind 88 is what I am looking for. My real question is, are the valve springs webcam sells with the titanium retainers good to use? (Just so I can order everything at once.) Or does anyone have other...
Just get ready to grind. I just ordered one and the chain rubs on the sprocket hub, so you need to grind it down. Also, make sure it clears the nut retainers.