duneracerweston
Well-Known Member
Well fellas its time. im opening shop again! not all the parts i made will be produced right away, some will be reintroduced in a revised form, and others will just be discontinued. So without any further ado, the Official DRW catalog.
**Disclaimer**
All steel and Aluminum parts will be sent in raw form, deburred and smothed but they will not be painted or polished or finished in anyway unless stated in that specific parts description.
YFM350
OEM carrier duel piston caliper relocation bracket. (Bolt On)
This bracket is avalible in both steel and aluminum. This bracket is the one used to mount a left front YFZ450 front caliper on the Warrior (89-04) rear carrier for improved breaking force.
Steel $35.00
Aluminum $$45.00
OEM Carrier duel piston caliper bracket. (weld on)
This bracket is designed to replace the factory rear caliper bracket on the rear carrier of the warrior (89-04) to mount a left front YFZ450 caliper to the rear carrier of a warrior to improve braking force. Unlike the normal bolt on version of this bracket, this one is designed to replace the factory mount that comes welded onto the factory carrier for a more original or sleeper style look.
Steel $35.00
Air box Delete Plate.
This plate will allow you to run without a air box at all. This style setup will require a clamp on style airfilter which does not come standard on the warrior. this can be used either with the factory intake tube to the carb or a custom one and can be used to utilize a larger diameter filter. **Please notify wheather this is a custom intake tube or OEM replacement plate before ordering.**
Aluminum $20.00
Dash Delete Plate.
This plate will Bolt onto the factory handlebar mount bolts and allow you to trash the oem plastic dash plate for a more simplistic dash plate made of aluminum.
Aluminum $15.00
Roundhouse Style rear duel piston caliper mount.
This is for all of you fellas running a lonestar swingarm and are tired of the rear brake being less then adequate. this is a slap on and play part no modding required.
Aluminum $50.00
AA Guards
Welcome the newest addition to the DRW parts catalog, AA Guards. They have been developed with the intention of maximum ground Clarence, and minimum weight combind with maximum protection.
Designed for both the roundhouse carrier with a duel piston caliper mount and a oem warrior carrier.
(Pictured is a roundhouse carrier type extremely similar to its oem placement counterpart)
Together (both sprocket and rotor guards)
$120
Seperate
Rotor guard. $80
Sprocket $55
Case savers
13tooth and 14tooth front sprockets
$55.60
Shipped in the lower 48.
This list will be updated as parts come into production so check back often. If your looking for a part not listed in this list Let me know and i can help the best i can!
Case savers are in the works. there is a lot of programming involved in them to make them to the standard i would feel comfortable with.
**Disclaimer**
All steel and Aluminum parts will be sent in raw form, deburred and smothed but they will not be painted or polished or finished in anyway unless stated in that specific parts description.
YFM350
OEM carrier duel piston caliper relocation bracket. (Bolt On)
This bracket is avalible in both steel and aluminum. This bracket is the one used to mount a left front YFZ450 front caliper on the Warrior (89-04) rear carrier for improved breaking force.
Steel $35.00
Aluminum $$45.00
OEM Carrier duel piston caliper bracket. (weld on)
This bracket is designed to replace the factory rear caliper bracket on the rear carrier of the warrior (89-04) to mount a left front YFZ450 caliper to the rear carrier of a warrior to improve braking force. Unlike the normal bolt on version of this bracket, this one is designed to replace the factory mount that comes welded onto the factory carrier for a more original or sleeper style look.
Steel $35.00
Air box Delete Plate.
This plate will allow you to run without a air box at all. This style setup will require a clamp on style airfilter which does not come standard on the warrior. this can be used either with the factory intake tube to the carb or a custom one and can be used to utilize a larger diameter filter. **Please notify wheather this is a custom intake tube or OEM replacement plate before ordering.**
Aluminum $20.00
Dash Delete Plate.
This plate will Bolt onto the factory handlebar mount bolts and allow you to trash the oem plastic dash plate for a more simplistic dash plate made of aluminum.
Aluminum $15.00
Roundhouse Style rear duel piston caliper mount.
This is for all of you fellas running a lonestar swingarm and are tired of the rear brake being less then adequate. this is a slap on and play part no modding required.
Aluminum $50.00
AA Guards
Welcome the newest addition to the DRW parts catalog, AA Guards. They have been developed with the intention of maximum ground Clarence, and minimum weight combind with maximum protection.
Designed for both the roundhouse carrier with a duel piston caliper mount and a oem warrior carrier.
(Pictured is a roundhouse carrier type extremely similar to its oem placement counterpart)
Together (both sprocket and rotor guards)
$120
Seperate
Rotor guard. $80
Sprocket $55
Case savers
13tooth and 14tooth front sprockets
$55.60
Shipped in the lower 48.
This list will be updated as parts come into production so check back often. If your looking for a part not listed in this list Let me know and i can help the best i can!
Case savers are in the works. there is a lot of programming involved in them to make them to the standard i would feel comfortable with.
Last edited:
