|
|
|
|
|
#1 |
|
Guest
Posts: n/a
|
Yamaha Raptor/Warrior 350:
Raptor Specs are on top of the Warrior specs. Engine 2005 Raptor 350 2004 Warrior Bore x Stroke 83mm x 64.5mm 83 x 64.5mm Carburetion Mikuni 36mm BSR Mikuni 36mm BTM Compression Ratio 9.2:1 9.2:1 Drive Train 2WD; Sealed O-Ring Chain 2WD; Sealed O-Ring Chain Ignition DC - CDI DC - CDI Starting System Electric Electric Transmission 6-Speed Manual Clutch w/ Reverse 6-Speed Manual Clutch w/ Reverse Type 348cc 4-Stroke Single, Air Cooled, SOHC 348cc, 4-Stroke Single, Air Cooled, SOHC Chassis 2005 Raptor 350 2004 Warrior Brakes/Front Dual Hydraulic Disc Dual Hydraulic Disc Brakes/Rear Hydraulic Disc Hydraulic Disc Suspension/Front Independent Double Wishbone, 7.9” w/ 5-way Preload Adjustment Independent Double Wishbone, 7.9” travel w/ 5-way Preload Adjustment Suspension/Rear Swing Arm, 8.3”, and Threaded Preload Adjustment Swing Arm, 7.9” travel with Rebound/Compression Adjuster & Threaded Preload Adjustment Tires/Front AT21x7-10 AT22 x 7-10 Tires/Rear AT20x10-9 AT22 x 10-9 Dimensions 2005 Raptor 350 2004 Warrior Dry Weight 375 Lbs 397 Lbs. Fuel Capacity 2.4 Gallons 2.4 Gallons Ground Clearance 4.5” 4.9” L x W x H 69.7”x 43.1”x 42.5” 72.4” x 42.5” x 42.5” Seat Height 32.3” 30.1” Wheelbase 47.6” 47.2” Other 2005 Raptor 350 2004 Warrior Colors Team Yamaha Blue/White; White/Red; Grey (Special Edition) Team Yamaha Blue/White; White/Red Lighting Dual 30W Krypton Multi-reflector Headlights & 21/5W Brake light Dual 30W Krypton Multi-reflector Headlights & 21/5W Brake light Warranty 6 Month (Limited Factory Warranty) 6 Month (Limited Factory Warranty) MSRP $4,999* Available from June 2004 $5,199* Available from August 2004 (Special Edition) $4,699* |
|
|
|
#2 |
|
Senior Member
|
there is hardly any difference other than shocks, weight, and tires. wtf is bsr on the carb does it give any power??
|
|
|
|
|
|
#3 |
|
Guest
Posts: n/a
|
Im not sure what exactly it means but the carb on the Warrior is a BTM with an accelerator pump and the BSR carb on the Raptor I believe give it an added throttle response and a little bit more low end.
|
|
|
|
#4 |
|
Senior Member
|
Yea they arent that much diffrent. I do like the restyling in the front fenders and light now. I didnt like it when it first came out but now i like them.
__________________
2001 Yamaha Warrior: 12:1 Arias Piston .20 over, .430 Webcam, titanium Springs, Mild port, Yoshimura RS3 exhaust, Edelbrock Carb......Lots more Currently getting a makeover... stay tuned! |
|
|
|
|
|
#5 |
|
Senior Member
|
r the sprockets both the same stock? 13 front 40 rear?
|
|
|
|
|
|
#6 |
|
Senior Member
|
yeah my rappy i think has a 13 40 stock but now mines 12 40
|
|
|
|
|
|
#7 |
|
Senior Member
Join Date: Feb 2005
Location: ST.PETE, FLORIDA
Posts: 353
|
STOCK RAPPY ARE 13 38 JUST LOOK ON THE SPROCKETS
|
|
|
|
|
|
#8 |
|
Senior Member
Join Date: Mar 2005
Location: Michigan
Posts: 1,231
|
Don't forget the smaller tire size on the rappy, compensates for the higher gearing. They're probably the same because of that. :o
|
|
|
|
|
|
#9 |
|
Senior Member
|
So would a raptor 350 carb fit on a warrior and would it be worth the money? Is there carburators off any other machines that will fit a warrior?
|
|
|
|
|
|
#10 | |
|
Senior Member
|
Quote:
|
|
|
|
|
|
|
#11 | |
|
Senior Member
|
Quote:
yes! 8-) |
|
|
|
|
|
|
#12 |
|
Senior Member
|
whats the stock chain size??
|
|
|
|
|
|
#13 |
|
Senior Member
|
528 98 links long
|
|
|
|
|
|
#14 | |
|
Senior Member
|
Quote:
|
|
|
|
|
|
|
#15 | |
|
Senior Member
Join Date: Mar 2005
Location: Michigan
Posts: 1,231
|
![]() ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D |
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|