Raptor and Warrior specs

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
G

Guest

Guest
Yamaha Raptor/Warrior 350:

Raptor Specs are on top of the Warrior specs.

Engine
2005 Raptor 350
2004 Warrior

Bore x Stroke
83mm x 64.5mm
83 x 64.5mm

Carburetion
Mikuni 36mm BSR
Mikuni 36mm BTM

Compression Ratio
9.2:1
9.2:1

Drive Train
2WD; Sealed O-Ring Chain
2WD; Sealed O-Ring Chain

Ignition
DC - CDI
DC - CDI

Starting System
Electric
Electric

Transmission
6-Speed Manual Clutch w/ Reverse
6-Speed Manual Clutch w/ Reverse

Type
348cc 4-Stroke Single, Air Cooled, SOHC
348cc, 4-Stroke Single, Air Cooled, SOHC

Chassis
2005 Raptor 350
2004 Warrior

Brakes/Front
Dual Hydraulic Disc
Dual Hydraulic Disc

Brakes/Rear
Hydraulic Disc
Hydraulic Disc

Suspension/Front
Independent Double Wishbone, 7.9” w/ 5-way Preload Adjustment
Independent Double Wishbone, 7.9” travel w/ 5-way Preload Adjustment

Suspension/Rear
Swing Arm, 8.3”, and Threaded Preload Adjustment
Swing Arm, 7.9” travel with Rebound/Compression Adjuster & Threaded Preload Adjustment

Tires/Front
AT21x7-10
AT22 x 7-10

Tires/Rear
AT20x10-9
AT22 x 10-9

Dimensions
2005 Raptor 350
2004 Warrior

Dry Weight
375 Lbs
397 Lbs.

Fuel Capacity
2.4 Gallons
2.4 Gallons

Ground Clearance
4.5”
4.9”

L x W x H
69.7”x 43.1”x 42.5”
72.4” x 42.5” x 42.5”

Seat Height
32.3”
30.1”

Wheelbase
47.6”
47.2”

Other
2005 Raptor 350
2004 Warrior

Colors
Team Yamaha Blue/White; White/Red; Grey (Special Edition)
Team Yamaha Blue/White; White/Red

Lighting
Dual 30W Krypton Multi-reflector Headlights & 21/5W Brake light
Dual 30W Krypton Multi-reflector Headlights & 21/5W Brake light

Warranty
6 Month (Limited Factory Warranty)
6 Month (Limited Factory Warranty)

MSRP
$4,999* Available from June 2004
$5,199* Available from August 2004 (Special Edition)
$4,699*
 
there is hardly any difference other than shocks, weight, and tires. wtf is bsr on the carb does it give any power??
 
Im not sure what exactly it means but the carb on the Warrior is a BTM with an accelerator pump and the BSR carb on the Raptor I believe give it an added throttle response and a little bit more low end.
 
Yea they arent that much diffrent. I do like the restyling in the front fenders and light now. I didnt like it when it first came out but now i like them.
 
r the sprockets both the same stock? 13 front 40 rear?
 
Don't forget the smaller tire size on the rappy, compensates for the higher gearing. They're probably the same because of that. :eek:
 
So would a raptor 350 carb fit on a warrior and would it be worth the money? Is there carburators off any other machines that will fit a warrior?
 
So would a raptor 350 carb fit on a warrior and would it be worth the money? Is there carburators off any other machines that will fit a warrior?
i dought it wouold be worth the extra money... i think it just gives better throttle response... if i were to get another carb it would be the quicksilver edelbrock carb there sick ;D
 
[quote:5rirfb3a]So would a raptor 350 carb fit on a warrior and would it be worth the money? Is there carburators off any other machines that will fit a warrior?
i dought it wouold be worth the extra money... i think it just gives better throttle response... if i were to get another carb it would be the quicksilver edelbrock carb there sick ;D[/quote:5rirfb3a]

yes! :cool:
 
logos.gif


;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
 
sorta, like its not a direct bolt on but yea you can make them fit. if im not mistaken there is a guy on this site who has done it
 
Back
Top