B BrothersJ New Member Joined May 22, 2015 Messages 2 Reaction score 0 May 23, 2015 #1 Just rebuilt the top-end. Now it won't run right. Keeps popping out through the carb. Any insight would help.
Just rebuilt the top-end. Now it won't run right. Keeps popping out through the carb. Any insight would help.
R Revo Active Member Joined Aug 10, 2013 Messages 29 Reaction score 0 Location Minnesota May 23, 2015 #2 Timing may be off a little bit. Double check the markings, make sure they are precise.
B BrothersJ New Member Joined May 22, 2015 Messages 2 Reaction score 0 May 24, 2015 #3 Timing is dead on. Think it is carb related. Gonna tear it down and rebuild it. Any tips on resetting it when putting back together.
Timing is dead on. Think it is carb related. Gonna tear it down and rebuild it. Any tips on resetting it when putting back together.
R Revo Active Member Joined Aug 10, 2013 Messages 29 Reaction score 0 Location Minnesota May 24, 2015 #4 When you rebuilt the top end did you replace the timing chain as well? If your jettings are stock. Turn the air and fuel screw complacently in and do 2 complete turns out for the base setting. Run it then adjust it to make it run better on idle.
When you rebuilt the top end did you replace the timing chain as well? If your jettings are stock. Turn the air and fuel screw complacently in and do 2 complete turns out for the base setting. Run it then adjust it to make it run better on idle.
lbjamm Well-Known Member Joined May 13, 2010 Messages 3,322 Reaction score 2 Location Fort Morgan,Co. May 25, 2015 #5 Sounds lean to me. Either that or your valve isn't sealing.