chuckwester
Member
Will second generation heel guards/footwells fit on first generation Warriors? More interested if the part that bolts to the footpeg and frame will be the same.
Last edited:
Heel guards
- Thread starter chuckwester
- Start date
Help Support Yamaha Raptor 350 & Warrior Forum:
Warrior1996
Well-Known Member
They do not directly bolt up, and the 1st gen warriors are missing the mount for them on the lower part of the subframe. There is a thread or two floating around here where people made them fit. It wasn't too much work if I remember correctly.
frit91
Well-Known Member
You have to get 2nd gen foot pegs as well The 1st gen foot pegs don't have the mounting holes in them. I used cushion clamps to hold the rear mount of the heel guard to the frame.
chuckwester
Member
I looked yesterday at my pegs and decided I needed 2nd gen pegs like you said and found a pair on ebay for $12.50 shipped and the cushion clamp is a great solution. Thanks for your help.:tup:
