Popped Ball Joint 1989... Raptor Arms fit?

Like the title says I popped both lower ball joints on my 1989 warrior and have been looking for used arms. Do the raptor 350 arms fit?

The part numbers look almost the same...
1989 Left Lower Arm 3GD-23570-00-35
2004 Left Lower Arm 3GD-23570-10-00

I have read that the -00- is the revision and the -35 is the color on the 1989.

the -10- revision and -00 color for the 2004.

If this is the case I think they should work.
But I am not 100% sure about my thinking here...lol..

I don't care about color as I will repaint them myself.

Charlie

Also....

2004 Warrior Left Lower Arm 3GD-23570-00-P0....

If this helps....

Charlie

I'm assuming your 89 is a first gen, so only first gen a arms will fit 87-89.

The part numbers for the 1987-88 arms are different then the ones for the 1989 and after so I think it really is a second gen.

Charlie

Where are your headlights mounted and what shape are they?

They are mounted by the handlebars and are square not round....

Sounds like you have a second gen. If you can take a picture of the lower a arm frame mounts, we can tell you for sure.

I am not home right now to take a pic..... But if it is a second gen will the raptor arms fit?

Charlie

I fairly sure they will fit, but lets get a second opinion on it. (I'd hate for you to buy a set and them not work.)

Yes they will work on a second gen.

Thanks a bunch guys!!!

Charlie