January 2015 QOTM

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bones

Well-Known Member
Joined
May 31, 2010
Messages
3,503
Reaction score
14
Location
Ottawa On. Canada


the caster & camber have bin fixed sins this pic

Chassis | Suspension | Controls

Frame: stock
A Arms:hansen fab +3 87 A-Arms
Swingarm: stock
Steering Stem: stock
Stabilizer: none
Axle: stock
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: stock
Throttle/Clutch Lever: stock / asv
Grips: blue skull grips
Nerfs: DG Fat Series Alloy Nerfs (not on right now)
Pegs: IMS roll design w/ kick ups
Bumper: DG alloy series
Grab Bar: stock
Front Shocks: ohlins 5 way adj.
Rear Shock: stock
Brake Pads: EBC
Brake Lines: n/a there isnt any on it right now (p.s. need +3 line)
Rotors F|R: stock
Rims F|R: stock raptor 600 f/r polished (not in pic)
Tires F|R: kenda fronts/bear claws

Body

Plastic: stock
Graphics|Seat Cover: stock
Number Backgrounds: none
Handguards: powermadd
Bar Pad: ??? i dont even know
Fuel Tank: stock
Skids plates: custom
Lighting: n/a

Engine|Drive System

Cylinder Head: stock p&p
Gaskets: winderosa
Piston: JE 11.5:1 piston (custom)
Cam|Valves Springs: hotcams s1/stock
Bore & Stroke: 84mm / 68.5
Displacement: 379cc
Carburetor: stock with pen spring mod and cap mod
Spark plug: NGK
Stator: RM stator
Shifter: stock
Air Filter|Box: K&N/ stock
Header|Silencer: stock/ stock yfz450 (custom)
Clutch|Plates|Springs: driveline +1/HD
Gearing F|R:15/38
Chain:eek:-ring 100 link chain
CDI|Killswitch: stock/stock
Cooling: bigbear set up
Other: yfz450 gytr heel guards , JP e-brake block off ... more to come
 
Back
Top