My 01 build

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

derheim

Well-Known Member
Joined
Nov 30, 2013
Messages
368
Reaction score
0
No pics yet. still waiting on all parts to get back in but this is my build log so far

Frame: Stock POWDER COATED
A Arms: +2 FULL FLIGHT W/ HEIMS & PLATE
Swingarm: STOCK POWDER COATED
Steering Stem: Stock
Stabilizer: N/A
Axle: TUSK +2+4
Carrier: STOCK
Locknut: TUSK
Hubs F|R: Stock
Bars: PROTAPER SE
Throttle/Clutch Lever: Stock
Grips: PROTAPER
Nerfs: PRO ELITE RACE COMP
Pegs: PRO ELITE
Bumper: DG
Grab Bar: Stock
Front Shocks: BANSHEE
Rear Shock: BANSHEE
Brake Pads: EBC
Brake Lines: STOCK FOR NOW
Rotors F|R: Stock
Rims F|R: POLISHED WHEELS 10X5,9X8
Tires F|R: SEDONA BAZOOKA

Body

Plastic: STOCK
Graphics|Seat Cover: STOCK
Number Backgrounds: N/A
Handguards: POWERMADD
Bar Pad: Protaper
Fuel Tank: Stock
Skids plates: STOCK (SHOPPING)
Lighting: Stock

Engine|Drive System (IN PROCESS)

Cylinder Head: STOCK
Gaskets: COMETIC EST
Piston: JE 10.50:1 85mm
Cam|Valves Springs: STOCK
Bore & Stroke: 85mm/ Stock
Displacement: 366cc
Carburetor: fcr39
Spark plug: NGK
Stator: Stock
Shifter: Stock
Air Filter|Box:
Header|Silencer: FMF POWERCORE 4/ STOCK
Clutch|Plates|Springs: DRIVELINE PERFORMANCE
Gearing F|R: 14t/40t
Chain: EK Gold
CDI|Killswitch: STOCK/ STOCK
Cooling: (SHOPPING)
 
Last edited:
That what I've been told. I will prob change them out to something else just not sure what.
 
I'm ready to get this thing together. It's scattered all thru my apt lol.
 
bahahaha^ love it man but hey if you want elite you got to get a whole lot of those stocks off that list
 
Yeah just trying to decide what I want.
 
y3avu2ar.jpg
parts are back from powder. Let's start building
 
I work w a guy who has a hook up. I got frame, swing, bumper,grab bar, and two small parts for $150 sandblasting included.
 
ebu9ugum.jpg
i need to get my old ball joints popped out. so I can get my front end built. I need to go buy a fork to separate them I guess.
 
Done for the night. Waiting on chain roller kit so I can install swing arm. New tusk axle 95% together.

7avugenu.jpg
 
Which chain slider kit did you go with?? Im running TM Designworks full kit on my 660 and my 350 just has the Powerlip roller I didn't buy the swingarm slide or the rear. UPP and TM's make killer products.
 
Stock replacements I got them off eBay. I got them before I knew about aftermarket ones. Learning curve
 
Back
Top