June QOTM Entry's

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

THORrider05

Well-Known Member
Joined
Feb 12, 2013
Messages
463
Reaction score
0
Location
California
Chassis | Suspension | Controls

Frame: 1987 warrior
A Arms: stock
Swingarm: 1999
Steering Stem: stock
Stabilizer: none
Axle: 1999
Carrier:1999
Locknut: stock
Hubs F|R:stock 87 fronts 1999 rear
Bars: Moose
Throttle/Clutch Lever: Motion Pro twist throttle, RM bend clutch perch
Grips: renthal full diamond
Nerfs: unknown but look like older dg's
Pegs: Custom dual stockers= wider
Bumper: Custom built by me
Grab Bar: stock
Front Shocks: Works A/T Stealers
Rear Shock: 1999 stocker soon to be banshee once i get back from being rebuilt
Brake Pads: fronts unknown rears moose
Brake Lines: stock
Rotors F|R: stock
Rims F|R: DWT
Tires F|R: GBC XC Masters

Body

Plastic: stock 1999 white
Graphics|Seat Cover: stock 1999
Number Backgrounds: District37 issued #'s with background
Handguards: Acerbis
Bar Pad: Renthal
Fuel Tank: Stock
Skids plates: Front custom on bumper, Rear unknown
Lighting: PR Lighting Solutions 3x3 pod LED on front bumper, Hella 500's in stock location

Engine|Drive System

Cylinder Head: Stock 1999
Gaskets: Wiseco
Piston: Wiseco 84.00mm High compression 10.25:1
Cam|Valves Springs: HC Stage1 cam/ valve springs stock
Bore & Stroke: 84.00mm bore, 64.50mm stroke
Displacement: 357cc
Carburetor:stock 1999
Spark plug:ngk
Stator:stock
Shifter: MSR yz/wr 250
Air Filter|Box: K&N drop in filter and DT1 foam filter as a spare
Header|Silencer: stock header ProCircuit silencer
Clutch|Plates|Springs: Unknown
Gearing F|R: 14/40
Chain: RK 520
CDI|Killswitch: Stock, Pro Design Deadman switch
Cooling :Stock
Other: Pen Spring mod, Modded rear brake pedal, custom upper motor mounts, custom front bumper, gusseted frame, wider stock pegs



 
Yes Alex's was lookin pretty dang good the other day, He redone his rear plastics, fixed the extended arms and Looked like he made some custom frame guards
 
Yup, I did. The custom frame guards are not finished yet though.
I'll enter later.
 





Chassis | Suspension | Controls

Frame:stock 87
A Arms: modded raptor 660 arms for +2
Swingarm:stock 87
Steering Stem:stock 87 with bar adapters
Stabilizer:n/a
Axle:durablue HD
Carrier:stock
Locknut: durablue nut
Hubs F|R:stock
Bars:tag metals
Throttle/Clutch Lever:stock/msr pro raptor
Grips:Scott lock grips
Nerfs:dg alloy
Pegs:custom kick ups
Bumper: custom
Grab Bar: custom
Front Shocks: raptor 660 shocks
Rear Shock: stock recharged
Brake Pads:sintered
Brake Lines:stock
Rotors F|R:stock
Rims F|R:stock goldies
Tires F|R:Itp holeshots all around or rear dick cepek spider tracs

Body

Plastic:stock red/plasti dipped
Graphics|Seat Cover:krazy graphics
Number Backgrounds:n/a
Handguards:n/a
Bar Pad:tag metals
Fuel Tank:stock
Skids plates:custom 1/6" steel
Lighting:35w led lights w/ custom mount

Engine|Drive System

Cylinder Head:stock
Gaskets:Tusk
Piston:wiseco 10.25:1 piston
Cam|Valves Springs: hot cam stage 1
Bore & Stroke:.20 over stock stroke
Displacement:350somthin
Carburetor:stock
Spark plug:ngk
Stator: caltric
Shifter:custom blaster shifter
Air Filter|Box: removed air box cover
Header|Silencer:stock rappy 350 pipe
Clutch|Plates|Springs:tusk and hd springs
Gearing F|R:13/40
Chain:non o-ring junk chain
CDI|Killswitch:stock/ pro armor kill switch
Cooling:sparky drilled cover and Hayden 401 cooler
Other:n/a
 
Last edited:
byranyju.jpg


When I first got her a year ago

To now:

amudu4eb.jpg


Frame: Stock POWDER COATED



A Arms: +2 FULL FLIGHT W/ HEIMS & PLATE



Swingarm: STOCK POWDER COATED



Steering Stem: Stock



Axle: TUSK +2+4



Carrier: STOCK



Locknut: TUSK



Hubs F|R: Stock



Bars: PROTAPER SE



Throttle/Clutch Lever: Stock



Grips: PROTAPER



Nerfs: PRM full nerfs with nets



Pegs: PRM



Bumper: DG



Grab Bar: Stock



Front Shocks: BANSHEE



Rear Shock: BANSHEE



Brake Pads: EBC



Brake Lines: rear stock and steel braided fronts



Rotors F|R: Stock



Rims F|R: POLISHED WHEELS 10X5,9X8



Tires F|R: SEDONA BAZOOKA







Body







Plastic: STOCK



Graphics|Seat Cover: STOCK



Handguards: POWERMADD



Bar Pad: Protaper



Fuel Tank: Stock



Skids plates: STOCK (SHOPPING)



Lighting: Stock







Engine|Drive System







Cylinder Head: STOCK



Gaskets: COMETIC EST



Piston: JE 10.50:1 85mm



Cam|Valves Springs: S1HC



Bore & Stroke: 85mm/ Stock



Displacement: 366cc



Carburetor: fcr39



Spark plug: NGK



Stator: Stock



Shifter: Stock



Air Filter|Box: custom



Header|Silencer: FMF POWERCORE 4/ STOCK



Clutch|Plates|Springs: DRIVELINE PERFORMANCE



Gearing F|R: 14t/40t



Chain: EK Gold
 
Last edited:
QOTM/POTM Schedule
Voting for a month will start the first day of the next month. For example, the February Vote will begin March 1st. Voting will last for 7 days. On the 8th of the month, the winners will be announced, and the entry threads for the current month will be opened. Entry threads will close the last day of the month. And then this vicious cycle starts all over again.

http://www.yfm350.com/forums/showthread.php?t=19374
 
Back
Top