• If you have bought, sold or gained information from our Classifieds, please donate to YFM350 and give back.

    You can become a Supporting Member or just click here to donate.

Custom swingarms

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Lighter, stronger, longer, better quality, better easier chain adjustment, you can order them as long as you want.

To make it easier on the ears.
 
For your price of 425. that dose not include the carrier correct?
This is an old thread dont think hes making them anymore ebay has some from the swingarm shop. A few people have them and there like 200-250 no carrier
 
Ok guys its been a very long time since ive posted here but I figured I would put the offer in here that im wanting to make some more of these swing arms. Ive had a few ppl reach out to me that they're interested in one and im finally able to get hours in the garage to fab this stuff. Please let me know if you have questions and details about them and ill be glad to answer them. You can text me @ 419-618-58nine2 for instant reply. Thanks for looking and ride hard!:atv:
 
Bro that's a nice piece! Great work my friend, i will run the voice.
QUESTION ? For Warrior's only, or you can fabricate by order.


PLEASE VOTE!!!

Complete Project HERE:
http://www.yfm350.com/forums/showthread.php?t=30709

-WARRIOR 350- to -VELOCIRAPTOR 450::
------------------------------------------------------


MOD LIST::
>Big Bear OIL Cooler MOD
>SUZUKI DRZ400 Direct Shifter,
>Tusk Handlebar Riser 30mm + hand made 36mm Riser,
>ProTaper Handlebar Grips & Handlebar,
>Powermadd Star Handguards,
>Outlaw Billet Fuel Cap,
>Tusk Clutch Cable,
>Tusk CLUTCH Kit + Heavy Duty Springs,
>Moose Racing EZ3 Shorty Clutch Lever Assembly,
>Tusk 36" Rear Brake Line,
>KFX 450 16.5 Front Shocks,
>Raptor 660 Rear Shock,
>BANSHEE Rear Shock Linkage,
>SUZUKI 400z +2 +1 Modded A-Arms,
>Custom Pro Armor Nerfbars & Heelguards,
>Raptor 660 Foot Pegs,
>D.I.D Timing Chain,
>D.I.D X Gold-Ring Chain,
>Clear ACRYLIC Air Box,
>Cold Air Filter INTAKE,
>K&N Air Filter,
>12 Tooth Front Sprocket,
>Hot Rods Bottom End Crankshaft Kit,
>WISECO 11:1 High Compression Piston,
>Hotcams Stage 1 CAM,
>Ported & Polish ENGINE,
>Valve JOB Done,
>Black Box HIGH PERFORMANCE CDI,
>Fox PERFORMANCE Race Coil,
>BRISK Racing Spark Plug,
>YFZ 450 HeadLights,
>Rebuilded Yoshimura PIPE,
>YFZ 450 Radiator Scoop Fenders,
>YFZ Front Hood Fender,
>Raptor 350 Fenders,
>Raptor Fenders Shaved alike YFZ 450,
>Raptor 350 Fuel Tank,
>Raptor 350 Seat & Seat Cover,
>Custom Flip Over Rear Frame & Seat,
>Custom HandMade Case Saver,
>Front LED DayLight Running MOD,
>Raptor 660 i-MX Rool Design IMS front bumper,
>PRO ARMOR Tether Safety KillSwitch,
>+4 Swingarm/3in REAR Wheel Spacers,

http://www.yfm350.com/forums/showthread.php?t=30709

::JCDigital::
 
I say warrior only because i use my elite warrior as a Jig to line the chain and every thing up. As long as the raptor 350 swing arms are exactly the same then yes they can be used for the raptor but im not 100% on that because i dont know anyone close that has a raptor 350 to measure or compare to.

They can be made to any length, but if someone ones a crazy long one then the price will increase since theres more tubing involved
 
I say warrior only because i use my elite warrior as a Jig to line the chain and every thing up. As long as the raptor 350 swing arms are exactly the same then yes they can be used for the raptor but im not 100% on that because i dont know anyone close that has a raptor 350 to measure or compare to.

They can be made to any length, but if someone ones a crazy long one then the price will increase since theres more tubing involved

Awesome, please PM Price Ranges.
-JCD-
 
How much would you charge to do one with a stock carrier in about the +2 range?


Sent from my iPhone using Tapatalk
 
Back
Top