00 warrior engine into 03

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

baabaablacksheep

New Member
Joined
May 26, 2015
Messages
2
Reaction score
0
I bought an 03 warrior 350 off a guy that did an engine swap from a 2000 warrior. He couldn't get it running because the stator wires don't match up. My question is can I buy a stator for an 03 to put in the engine so I'll have all the correct wiring or is it more complicated than that.

Also he spliced in some wires to try to match the wiring harnesses and am worried about damage that could have been done to the electrical system. I bought it for dirt cheap and it has great compression so I'm not concerned about spending a little money.
 
I noticed the flywheels were the same throughout the years. Bought a $40 stater off Ebay for an 03 engine just to see if it would fit and it runs and charges great. Thanks for the reply lbjamm. Heads up on the Ebay stater, the wiring sucks so modification is necessary.
 
Back
Top