Go Back   YFM350.com Forums > Warrior/Raptor 350 Technical > Instructional Tutorials
Reply
 
Thread Tools Search this Thread Display Modes
Old 01-06-2013, 10:42 PM   #1
DeadLastRacing
 
DeadLastRacing's Avatar
 
Join Date: Nov 2007
Location: Ohio
Posts: 7,590
Default Airbox modd for a Shee shock

Easiest way of modding the air box to run a shee shock.

Need:
Dremel (if you have one, or another cutting implement)
Tin (I used 26guage steel available at home depot)
Blade (to clean up the edges of the box once its been cut)
Drill
Pop Rivets
RTV gasket
Template (I'll scan it in here to download after a bit)


Cut the bottom "hump" off the stock airbox. So that it is cut flat with the front of the box bottom.



Make or print (here soon) this template. Back and side tabs get bent and the fronts stay flat.



Cut out your material and bend the tabs



Apply RTV to the edge of the box and to the materials tabs



Attach the material. Hold tight and drill your holes for the pop rivits. Drill one hole and attach the pop rivit one at a time. It keeps everything from shifting.


Fill the edges with RTV. Be generous in the corners as it is what is holding those places to the material. No picture but also drill a drainage hole in the material somewhere.


Let the RTV dry and then install. Your shee shock now has plenty of room and won't hit your airbox.



You can always tape it off and hit it with some black paint to blend it in. I'm lazy, so install it and run! Its not the freshest looking modd but it'll work. Keeps the Filter covered and give the shee shock room to move.
__________________
95 YFM366
JE piston, .60 bore, .415 Megacycle cam, Cometic gaskets, HD Kibblewhite springs, P&P, +1 Intake, Perma cooler, IMS tank, +2 ASR A-arms and pro-x tie rods, Hansen Fab Honda style +3 swingger, G Force adj. axle, 38mm Carb, Fox Floats, 01 660 rear shock, UNI Filter, Cyrca Pro-bends, BKT AT-111HD, YZ250 shifter, PRM skids, DMC Duel exhaust, FMF PB Header, SS brake lines, ProArmor pegs and heel guards, PRM grab bar, Graydon bumper, alba stabilizer, DeadLastGraphix kit




Login or Register to Remove Ads
DeadLastRacing is offline   Reply With Quote
Old 01-06-2013, 10:54 PM   #2
88WarriorBoy
Senior Member
 
88WarriorBoy's Avatar
 
Join Date: Jun 2012
Location: Manito,Illinois
Posts: 2,223
Default

Nice write up Dean
__________________
88 Warrior (November 2012 QOTM Winner)
Creator/President of the FIRST GEN CLUB
MODS
K&N filter, DG Front bumper, Aluminum engine skid plate, Pro Taper Se handlebars, FMF Powercore 4, Durable +2 +4 axle, Alba Pro Nerfs,14/40 gearing, Tusk Hand Guards, Tusk HD Clutch, Pen Spring mod carb mod and Valve stem cap carb mod, Parking Brake Block off, 87 A-arms with replaceable ball Joints, 01 660 raptor rear shock, UM airbox
Jetting
157.5 Main jet; 45 pilot; Needle on 3rd clip
88WarriorBoy is offline   Reply With Quote
Old 01-06-2013, 11:00 PM   #3
DeadLastRacing
 
DeadLastRacing's Avatar
 
Join Date: Nov 2007
Location: Ohio
Posts: 7,590
Default

Quote:
Originally Posted by 88WarriorBoy View Post
Nice write up Dean
Hahah. The pics do all the talking. Just a simple modd to run another good modd. Just one idear of how to go about it. There are always dozens of ways to do anything. This one can be done in a few hours with really basic tools and stuff available most anywhere.
__________________
95 YFM366
JE piston, .60 bore, .415 Megacycle cam, Cometic gaskets, HD Kibblewhite springs, P&P, +1 Intake, Perma cooler, IMS tank, +2 ASR A-arms and pro-x tie rods, Hansen Fab Honda style +3 swingger, G Force adj. axle, 38mm Carb, Fox Floats, 01 660 rear shock, UNI Filter, Cyrca Pro-bends, BKT AT-111HD, YZ250 shifter, PRM skids, DMC Duel exhaust, FMF PB Header, SS brake lines, ProArmor pegs and heel guards, PRM grab bar, Graydon bumper, alba stabilizer, DeadLastGraphix kit

DeadLastRacing is offline   Reply With Quote
Old 01-06-2013, 11:01 PM   #4
alex456123
Senior Member
 
alex456123's Avatar
 
Join Date: Sep 2012
Location: michigan
Posts: 4,008
Send a message via Yahoo to alex456123 Send a message via Skype™ to alex456123
Default

thanks dean i will need this later!
__________________
87 warrior 350
alex456123 is offline   Reply With Quote
Old 01-06-2013, 11:02 PM   #5
YAMAHAULER
Senior Member
 
YAMAHAULER's Avatar
 
Join Date: Nov 2011
Location: Wisconsin
Posts: 7,031
Default

nice PIC up Dean lmfao!!! works for me
__________________
YES SHE'S FAST! NO YA CAN'T RIDE HER.
ELITE 2002 SE Warrior AKA "#5" GONE BUT NOT FORGOTTEN
Never ending build thread
http://www.yfm350.com/forums/showthread.php?t=27195
Elite thread
http://www.yfm350.com/forums/showthread.php?t=29258

Other Quads

99 Wolverine 350 4x4 AKA "BAD WOLF"

03 Suzuki LT-Z400 (GONE)

04 Bear Tracker 250 (restoration in progress) SOLD!!!
http://www.yfm350.com/forums/showthread.php?t=3
YAMAHAULER is offline   Reply With Quote
Old 01-06-2013, 11:17 PM   #6
DeadLastRacing
 
DeadLastRacing's Avatar
 
Join Date: Nov 2007
Location: Ohio
Posts: 7,590
Default

It'll work. I off'ed this and my shee shock for an 01 660. Interested to feel the difference if any.

If you run or buy an aftermarket aluminum airbox,(which I have been running) no modification is needed.
__________________
95 YFM366
JE piston, .60 bore, .415 Megacycle cam, Cometic gaskets, HD Kibblewhite springs, P&P, +1 Intake, Perma cooler, IMS tank, +2 ASR A-arms and pro-x tie rods, Hansen Fab Honda style +3 swingger, G Force adj. axle, 38mm Carb, Fox Floats, 01 660 rear shock, UNI Filter, Cyrca Pro-bends, BKT AT-111HD, YZ250 shifter, PRM skids, DMC Duel exhaust, FMF PB Header, SS brake lines, ProArmor pegs and heel guards, PRM grab bar, Graydon bumper, alba stabilizer, DeadLastGraphix kit

DeadLastRacing is offline   Reply With Quote
Old 01-06-2013, 11:17 PM   #7
88WarriorBoy
Senior Member
 
88WarriorBoy's Avatar
 
Join Date: Jun 2012
Location: Manito,Illinois
Posts: 2,223
Default

You'll love the 660 rear
__________________
88 Warrior (November 2012 QOTM Winner)
Creator/President of the FIRST GEN CLUB
MODS
K&N filter, DG Front bumper, Aluminum engine skid plate, Pro Taper Se handlebars, FMF Powercore 4, Durable +2 +4 axle, Alba Pro Nerfs,14/40 gearing, Tusk Hand Guards, Tusk HD Clutch, Pen Spring mod carb mod and Valve stem cap carb mod, Parking Brake Block off, 87 A-arms with replaceable ball Joints, 01 660 raptor rear shock, UM airbox
Jetting
157.5 Main jet; 45 pilot; Needle on 3rd clip
88WarriorBoy is offline   Reply With Quote
Old 01-06-2013, 11:22 PM   #8
duneracerweston
Senior Member
 
duneracerweston's Avatar
 
Join Date: Jan 2011
Location: Brownsboro Texas
Posts: 6,068
Default

Quote:
Originally Posted by DeadLastRacing View Post
It'll work. I off'ed this and my shee shock for an 01 660. Interested to feel the difference if any.

If you run or buy an aftermarket aluminum airbox,(which I have been running) no modification is needed.
Or have a certain mx junkie build you one...
__________________
Elite 2002 SE Walle

DRW PERFOMANCE

http://www.yfm350.com/forums/showthread.php?t=31275

JE, White Brothers, GYT-R, G1P, DRW, SH Design, Sidewinder, KYB, AMP, Maier, DG, ITP, Balistic Performance, CV4, MSR, Moose Racing, Dalton Racing, Mr. Crankshaft, IMS Roll Design, American Star Racing, Lone Star Racing, Speedlinez, ASV, Driveline Performance, Thermotech, JT Racing, Driven Performance, East Coast ATV, ALBA, DuraBlue, Shindy, Kibble White, D.I.D, K&N, OuterWares, Kehine.
duneracerweston is offline   Reply With Quote
Old 01-06-2013, 11:46 PM   #9
rowdy_sohc
Senior Member
 
Join Date: Aug 2012
Posts: 167
Default

I can't wait to run that shee shock! Eventually I will get front shee shocks
rowdy_sohc is offline   Reply With Quote
Old 01-06-2013, 11:47 PM   #10
YAMAHAULER
Senior Member
 
YAMAHAULER's Avatar
 
Join Date: Nov 2011
Location: Wisconsin
Posts: 7,031
Default

I need a pair for the Blasty
__________________
YES SHE'S FAST! NO YA CAN'T RIDE HER.
ELITE 2002 SE Warrior AKA "#5" GONE BUT NOT FORGOTTEN
Never ending build thread
http://www.yfm350.com/forums/showthread.php?t=27195
Elite thread
http://www.yfm350.com/forums/showthread.php?t=29258

Other Quads

99 Wolverine 350 4x4 AKA "BAD WOLF"

03 Suzuki LT-Z400 (GONE)

04 Bear Tracker 250 (restoration in progress) SOLD!!!
http://www.yfm350.com/forums/showthread.php?t=3
YAMAHAULER is offline   Reply With Quote
Old 01-06-2013, 11:51 PM   #11
DeadLastRacing
 
DeadLastRacing's Avatar
 
Join Date: Nov 2007
Location: Ohio
Posts: 7,590
Default

Quote:
Originally Posted by rowdy_sohc View Post
I can't wait to run that shee shock! Eventually I will get front shee shocks
Its HUGE upgrade from the stocker!
__________________
95 YFM366
JE piston, .60 bore, .415 Megacycle cam, Cometic gaskets, HD Kibblewhite springs, P&P, +1 Intake, Perma cooler, IMS tank, +2 ASR A-arms and pro-x tie rods, Hansen Fab Honda style +3 swingger, G Force adj. axle, 38mm Carb, Fox Floats, 01 660 rear shock, UNI Filter, Cyrca Pro-bends, BKT AT-111HD, YZ250 shifter, PRM skids, DMC Duel exhaust, FMF PB Header, SS brake lines, ProArmor pegs and heel guards, PRM grab bar, Graydon bumper, alba stabilizer, DeadLastGraphix kit

DeadLastRacing is offline   Reply With Quote
Old 01-06-2013, 11:51 PM   #12
87warrior917
Senior Member
 
87warrior917's Avatar
 
Join Date: Oct 2010
Location: New London, Ohio
Posts: 3,052
Send a message via Yahoo to 87warrior917
Default

Good write up, same thing i did. Might wanna drill a small hole so it dont hold water
__________________
96 Warrior
-JE 366, P&P, KW oversized valve HD springs, Hotcam1, UM, Edlebrock, Yoshimura, KG clutch, ASR, Fox Floats, Lonestar +4 swinger and +1 stem, IMS, Blingstar, Dynatech, PRM, ITP, Maxxis, GYT-R, Pro-Taper, Durablue Eliminator, All murdered out.

05 Wolverine- Wifes quad
- Pro Design filter & Adapter, HMF slip-on, Custom pegs, and a few pink FOX decals
87warrior917 is offline   Reply With Quote
Old 01-06-2013, 11:53 PM   #13
DeadLastRacing
 
DeadLastRacing's Avatar
 
Join Date: Nov 2007
Location: Ohio
Posts: 7,590
Default

Quote:
Originally Posted by 87warrior917 View Post
Good write up, same thing i did. Might wanna drill a small hole so it dont hold water
I did. No picture of it. It's in the description.
__________________
95 YFM366
JE piston, .60 bore, .415 Megacycle cam, Cometic gaskets, HD Kibblewhite springs, P&P, +1 Intake, Perma cooler, IMS tank, +2 ASR A-arms and pro-x tie rods, Hansen Fab Honda style +3 swingger, G Force adj. axle, 38mm Carb, Fox Floats, 01 660 rear shock, UNI Filter, Cyrca Pro-bends, BKT AT-111HD, YZ250 shifter, PRM skids, DMC Duel exhaust, FMF PB Header, SS brake lines, ProArmor pegs and heel guards, PRM grab bar, Graydon bumper, alba stabilizer, DeadLastGraphix kit

DeadLastRacing is offline   Reply With Quote
Old 01-06-2013, 11:57 PM   #14
87warrior917
Senior Member
 
87warrior917's Avatar
 
Join Date: Oct 2010
Location: New London, Ohio
Posts: 3,052
Send a message via Yahoo to 87warrior917
Default

Shows how much i read lol
__________________
96 Warrior
-JE 366, P&P, KW oversized valve HD springs, Hotcam1, UM, Edlebrock, Yoshimura, KG clutch, ASR, Fox Floats, Lonestar +4 swinger and +1 stem, IMS, Blingstar, Dynatech, PRM, ITP, Maxxis, GYT-R, Pro-Taper, Durablue Eliminator, All murdered out.

05 Wolverine- Wifes quad
- Pro Design filter & Adapter, HMF slip-on, Custom pegs, and a few pink FOX decals


87warrior917 is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -4. The time now is 11:17 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.