dave76
Well-Known Member
Figured out you could make a Warrior a 400 by using Yamaha parts, this is just for reference. 1st way would be to use a 06 Bigbear cylinder, and rod, have your crank stroked 7mm or buy a Hotrods stroker crank and then just buy a Weisco 1mm over Warrior piston. However the use of the bigbear cylinder would require you modifing the upper motor mount as the Bigbear cylinder is about 8 or 9mm taller.
Its actually way expensive doing it this way. 1st way runs you close to $600 so looks like the Hotrods crank and piston kit is the better deal.
Its actually way expensive doing it this way. 1st way runs you close to $600 so looks like the Hotrods crank and piston kit is the better deal.