YZF450 heel guard install

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JRK5892

Well-Known Member
Joined
Dec 17, 2012
Messages
254
Reaction score
0
guys so a buddy of mine has a Bill edition YZF450 he put on some monster nerfs and gave me his stock heel guards... I simply took some tin snips trimmed them so they would fit around my nerfs... man they all but bolted right up! had to bend in the peg mounts about a 1/2" then cut off the top mount, but they bolted right up... they can be found super cheap figured i would share some pics as they do a great job of keeping mud off your feet and all but bolt right up!

here are some pics when i zip tied them to check fitment
1504111_10152474401378073_1716220426763013663_n.jpg


10678473_10152474401113073_5117372984291162306_n.jpg


everythng bolted into place, sorry for the dark pics
10698655_10152522885488073_4271082557047059046_n.jpg


10518832_10152522885118073_2342480774149431141_n.jpg
 
they are butter smooth i cleaned the edges with high grit on the belt sander... the area that looks sloppy is the silver marker that i used to give me my cut lines... ill get some good pics in the light this week to show them on the bike and how they look. i do like the heat gun idea though, may go back and still hit that on them to really finish the look! great idea
 
Back
Top