Rear grab bar mod

This is my super convenient mod to my rear grab bar. When I bought my warrior it had a rack and it was nice to carry stuff but when I wanted to have fun it was in the way. I so came up with a way to switch from work to play with just two pins.

- I made a receiver hitch type system with one pin on each side.
-Be careful when lining up the two ends up if you don't do it perfectly then it will side in and out very hard.

-When you attach the receiver piece to the frame I would suggest putting a lock nut after the welded nut because those are prone to stripping especially if you have heavy attachments on there.

-Make sure to weld the taillight bracket close enough so the the wires reach.

-This is a great place to add a bracket for the license plate as well so that you don't have to worry about switching it from attachment to attachment.

-I also integrated a 12v plug on the rack with a double pronged plug for other things like a spot light or a phone charger or whatever else you can think of.

Overall this very convenient even for just working on the machine because it's just one less thing in you way.




Sent from my iPod touch using Tapatalk