87warrior917's riding pics/vids

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Ah ok that makes more sense lol

Also i may add when i mess with the timing curves (theres 4 diff ones) It seems like the rev lim gets higher or lower depending which one i have. The curve was on the 4th setting which is topend and i have yet to hit the rev lim on that setting. If i put it to 1st setting which is stock i hit it all the time so idk, i just run it hah
 
BAD to teh ASS.

Turned out better then I though it'd be. Killer quad my friend. You guys are deff uppin the anty.

I cant wait to get mine back together now.
 
i'm confused. are you still running the same engine setup in the swamp thing? what's in the 87? do you have 2 yoshi pipes?




btw 917, do you have a link to the guy who did your head in PA? i can't for the life of me remember who it was. gonna check into getting the +1 KB valve job.
 
Last edited:
i'm confused. are you still running the same engine setup in the swamp thing? what's in the 87? do you have 2 yoshi pipes?

Bwahah its all the same motor/pipe setup. I only had it in the 87 to test the arms and swinger. Soon enough ill be tracking down a motor for the 87, prob wont be a warrior motor either........


btw 917, do you have a link to the guy who did your head in PA? i can't for the life of me remember who it was. gonna check into getting the +1 KB valve job.

Lemme find it ill post it up in my elite thread.
 
Got some good snow today, more riding pics, and vids.

This hill is quite steep, about 35ft high, the ole lady was quite proud of getting up it for the 1st time.

http://

Just me dickin around my lil circle track.

http://

http://
SAM_1520.jpg

http://
SAM_1525.jpg

http://
SAM_1527.jpg

http://
SAM_1528.jpg

http://
SAM_1532.jpg

http://
SAM_1533.jpg
 
3rd weekend in a row we went riding, kinda nice to blow off some steam. Swamp Thing performed flawlessly till the end of the day. 1st Got some water in the stator connetors, which cuts out the spark. Fixed that then i notcied the front left tire was completely flat. We only had about an hour of daylight left so i said **** it and kept goin on it. Then once the sun was down, my batterys negative terminal broke clean off..... Anyway looks like i got some stuff to fix on er. Also my moms boyfriends nephew came with his brand new Can-am 1000xt. If you ever have a chance to ride one DO IT!!!! Things fuggin INSANE! It'll throw a damn roost 35-40ft high and long. I thought Swamp Thing rode nice with the floats, but damn this thing soaked up every bump i could find to hit. It is def the most impressive machine ive ever ridin. Now if i had 13k you bet your ass id have one.

http://
SAM_1546.jpg

http://
SAM_1541.jpg

http://
SAM_1545.jpg

http://
SAM_1544.jpg

http://
SAM_1542.jpg
 
What kind of shocks do you have on your warrior? And what is the top speed with all the work you have done?
 
What kind of shocks do you have on your warrior? And what is the top speed with all the work you have done?

Fronts are Fox Float R's and rear is off an 02 banshee. Idk top speed exactly, I would guess maybe 60 or so? I run stock gearing (13-40) with a 20" rear tire. The riding I do is mostly hills and tight woods so I like the low end grunt.
 
You had the 20" razr2's in the rear right? I have the 22's on the ITP Baja black just like you and I'm looking to get 22's in the front on black baja's again.
 
Fronts are Fox Float R's and rear is off an 02 banshee. Idk top speed exactly, I would guess maybe 60 or so? I run stock gearing (13-40) with a 20" rear tire. The riding I do is mostly hills and tight woods so I like the low end grunt.

Did the banshee shock have to be re valved for the +4 swinger?
 
Back
Top